(317) 545-2151

836 Landfill Compactor

Request a Quote
Download a Product Brochure

Product Specs

Engine

Gross Power - SAE J1995:2014
562 hp
Net Power - SAE J1349:2011
496 hp
Net Power - ISO 9249:2007
502 hp
Engine Power - ISO 14396:2002
553 hp
Engine Model
C18
Emissions
U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V and Japan 2014 or Brazil MAR-1, equivalent to China Nonroad Stage III/U.S. EPA Tier 3/ EU Stage IIIA
Rated Speed
1900 rpm
Peak Torque ( 1,400 rpm )
2275 lbf·ft
Torque Rise
52%
Bore
5.71 in
Stroke
7.2 in
Displacement
1104.5 in³
High Idle Speed
2120 r/min
Low Idle Speed
750 r/min
Maximum Altitude - Without Derating
7500 ft
Note
Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.

Operating Specifications

Operating Weight (Tier 4 Final/Stage V)
124063 lb
Operating Weight (Tier 3/Stage IIIA equivalent)
123321 lb
Maximum Operating Weight (Tier 4 Final/Stage V)
126364 lb
Maximum Operating Weight (Tier 3/Stage IIIA equivalent)
125622 lb

Transmission

Transmission Type
Planetary - Powershift - ECPC
Direct Drive - Forward 1
4.3 mile/h
Direct Drive - Forward 2
7.8 mile/h
Direct Drive - Reverse 1
4.6 mile/h
Direct Drive - Reverse 2
8.2 mile/h

Hydraulic System - Lift

Lift System - Circuit
Flow Sharing Implement; Pilot Operated LS Valve w/EH
Lift System - Pump
Variable displacement piston
Max Flow @ 2000 rpm
79 gal/min
Relief Valve Setting - Lift
4206 psi
Cylinders, Double Acting: Lift, Bore, Stroke
137.9 mm x 1021 mm (5.5 in x 40.2 in)
Pilot System
Variable displacement piston
Pilot Relief Valve Setting
551 psi

Hydraulic System - Steering

Steering System - Circuit
Flow Sharing Implement; Pilot, load sensing
Steering System - Pump
Piston – Variable Displacement
Max Flow @ 2000 rpm
79 gal/min
Relief Valve Setting - Steering
3495 lb/in²
Total Steering Angle
86
Steering Cycle Times - High Idle
3.9 s
Steering Cycle Times - Low Idle
6.4 s

Service Refill Capacities

Fuel Tank
209 gal (US)
Diesel Exhaust Fluid Tank
9 gal (US)
Cooling Systems - Tier 4 Final/EU Stage V
40 gal (US)
Cooling System - Tier 3/Stage IIIA Equivalent
37.2 gal (US)
Engine Crankcase
16 gal (US)
Transmission
21.9 gal (US)
Differential - Final Drives - Front
49 gal (US)
Differential - Final Drives - Rear
50 gal (US)
Hydraulic System - Implement/Steering
46.2 gal (US)
Hydraulic Tank Only
27.2 gal (US)
Note
- All nonroad Tier 4 Final/Stage V diesel engines are required to use: - Ultra low sulfur diesel (ULSD) fuels containing 15 ppm (mg/kg) for EPA and 10 ppm (mg/kg) for EU sulfur or less. Biodiesel blends up to B20 are acceptable when blended with 15 ppm

Air Conditioning System

Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.4 kg of refrigerant which has a CO2 equivalent of 2.002 metric tonnes.

Axles

Front
Planetary – Fixed
Rear
Planetary – Oscillating
Oscillation Angle
±6°

Braking System

Service Brakes
Multi Disc Wet (Enclosed) 2 WHL
Parking Brake
Spring Applied, Hydraulic Released

Sound Performance - Tier 4 Final/EU Stage V

Operator Sound Level (ISO 6396:2008) - Standard
72 dB(A)
Machine Sound Level (ISO 6395:2008) - Standard
111 dB(A)
Operator Sound Level (ISO 6396:2008) - Suppression
72 dB(A)
Machine Sound Level (ISO 6395:2008) - Suppression
109 dB(A)
Note (1)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurements are conducted at 70% of the maximum engine cooling fan speed.
Note (2)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Note (3)
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurements are conducted at 70% of the maximum engine cooling fan speed.

Sound Performance - Tier 3 / Stage IIIA

Operator Sound Level (ISO 6396:2008) - Standard
72 dB(A)
Machine Sound Level (ISO 6395:2008) - Standard
112 dB(A)
Operator Sound Level (ISO 6396:2008) - Suppression
72 dB(A)
Machine Sound Level (ISO 6395:2008) - Suppression
110 dB(A)
Note (1)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurements are conducted at 70% of the maximum engine cooling fan speed.
Note (2)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.
Note (3)
The machine sound power level was measured according to the test procedures and conditions specified in ISO 6395:2008. The measurements are conducted at 70% of the maximum engine cooling fan speed.

Dimensions (Approximate)

Height to Top of Beacon
15.2 ft
Height to Top of Air Conditioning Condenser
15.2 ft
Height - Cab Roof
14.1 ft
Height - Top of Exhaust Pipe
15.1 ft
Height - Top of Hood
11.3 ft
Ground Clearance to Hitch
2.1 ft
Ground Clearance to Transmission Guard
2.1 ft
Ground Clearance to Bottom of Bumper
3.2 ft
Centerline of Rear Axle to Rear Compactor Guard
11.3 ft
Hitch to Centerline of Front Axle
7.5 ft
Wheel Base
14.9 ft
Width over Front Striker Bars
12.9 ft
Width over Rear Striker Bars
12.9 ft
Width over Platform
10.5 ft
Width over Drums
14 ft
Overall Machine Length with Semi U-Blade
35.8 ft

Straight Blade

Capacity
25.9 yd³
Overall Width
17 ft
Height
7.4 ft
Height of Cutting Edge
3.7 ft
Digging Depth
1.2 ft
Ground Clearance
5.7 ft
Turning Radius – Outside Corner of Blade
28.7 ft
Turning Radius - Inside of Wheels
11.9 ft
Weight
6894 lb
Total Operating Weight
123000 lb

Semi U-Blade

Capacity
29.3 yd³
Overall Width
17.4 ft
Height
7.5 ft
Height of Cutting Edge
4.1 ft
Digging Depth
1.2 ft
Ground Clearance
5.7 ft
Turning Radius – Outside Corner of Blade
28.9 ft
Turning Radius – Inside of Wheels
11.9 ft
Weight
7963 lb
Total Operating Weight
124063 lb

U-Blade

Capacity
33.6 yd³
Overall Width
17.4 ft
Height
7.2 ft
Height of Cutting Edge
4.1 ft
Digging Depth
3.1 ft
Ground Clearance
3.9 ft
Turning Radius – Outside Corner of Blade
28.8 ft
Turning Radius – Inside of Wheels
11.9 ft
Weight
7696 lb
Total Operating Weight
123785 lb

Wheels

Combination Tips (Weight Group)
28250 lb
Plus Tips - Weight (Group)
29784 lb
Paddle Tips - Weight (Group)
272227 lb
Chopper Tips (Weight Group)
28404 lb
Diamond Tips Weight (Group)
32659 lb
Outside Diameter
83.8 in
Outside Diameter - Diamond
84.3 in
Drum Diameter
69.7 in
Drum Width
55.1 in
Feet Per Row
8
Feet Per Wheel
40
Replaceable
Weld on
Width Over Drums
4280 mm
Tip Height
179 mm
Tip Height - Diamond
7.25 in

Standard Equipment

  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Power Train
    • Advanced Productivity Electronic Control Shifting (APECS)
    • Air to air aftercooler
    • Brakes, fully hydraulic, enclosed, wet multiple disc brakes
    • Cat Clean Emission Module, insulated (Tier 4 Final/Stage V/Korea Stage V and Japan 2014)
    • Electro hydraulic parking brake
    • Engine, Cat C18: – Tier 4 Final/Stage V/Korea Stage V and Japan 2014 – Tier 3/Stage IIIA equivalent
    • Fuel priming pump, electric
    • Fuel to air cooler
    • Ground level engine shutoff
    • Guard (3 piece) transmission
    • Heat shield, turbo and exhaust manifold
    • Hydraulically driven demand fan
    • Integrated braking
    • Radiator, Aluminum Modular Radiator (AMR)
    • Separated cooling system
    • Starting aid (ether) automatic
    • Throttle lock
    • Torque converter with lockup clutch (LUC)
    • Turbine precleaner, engine air intake
    • Transmission, planetary, with 2F/2R speed range control
    • Underhood ventilation system
  • Electrical
    • Alarm, back-up
    • Alternator, 150 amp
    • Batteries, maintenance-free (4-1,000 CCA)
    • Converter, 10-15 amp, 24V to 12V
    • Lighting system, halogen (front and rear)
    • Lighting, access stairway
    • Starter, electric (heavy duty)
    • Starter lockout (ground level)
    • Starting receptacle for emergency start
    • Transmission lockout (ground level)
  • Operator Environment
    • Air conditioner w/roof-mounted condenser
    • Cab, sound-suppressed and pressurized
    • Internal four-post rollover protective structure (ROPS/FOPS)
    • Radio ready for (entertainment) includes antenna, speakers and converter (12V, 10-15 amp) 12V power port for mobile phone or laptop connection
    • Camera, rear vision
    • Coat and hard hat hooks
    • Flip-up armrest
    • Heater and defroster
    • Horn, electric
    • Hydraulic controls (floor mounted)
    • Implement hydraulic lockout
    • Laminated glass
    • Light, (dome) cab
    • Lunchbox and beverage holders
    • Instrumentation, Gauges: – DEF fluid level (Tier 4 Final/Stage IV) – Hydraulic oil temperature – Speedometer/tachometer – Torque converter temperature
    • Instrumentation, Warning Indicators: – Action alert system, three category – Axle/brake oil temp, front – Brake oil pressure – Electrical system, low voltage – Engine failure malfunction alert and action lamp
    • Mirrors, rearview (externally mounted)
    • Parking brake status
    • Radio, CB (ready)
    • Seat, Cat Comfort, (cloth) air suspension
    • Seat belt, retractable, 76 mm (3") wide
    • STIC Control System with steering lock
    • Sun visor, front
    • Glass (window) - rubber mounted glass
    • Transmission gear (indicator)
    • Vital Information Management System (VIMS) with graphical information display: external data port, customizable operator profiles
    • Wet-arm wipers/washers (front and rear)
    • Intermittent wipers (front and rear)
  • Wheels
    • Wheels, paddle, plus, combination, and diamond wheel configurations
  • Guards
    • Guards, axle (front and rear)
    • Guards, cab window
    • Guards, crankcase and power train, hydraulically powered
    • Guards, rear fan and grill
  • Blades
    • Bulldozer arrangement is included in the standard equipment. Bulldozer blades are optional.
  • Fluids
    • Antifreeze, premixed 50% concentration of extended life coolant with freeze protection to –34° C (–29° F)
  • Other Standard Equipment
    • Auto Blade Positioner (ABP)
    • Demand fan/swing out (hydraulic reversible)
    • Doors, service access locking
    • Ecology drains for engine, radiator, hydraulic tank
    • Electronic clutch pressure control and remote mounted pressure taps
    • Emergency platform egress
    • Engine, crankcase, 500 hour interval with CJ-4 oil
    • Fuel tank, 793 L (210 gal)
    • Hitch, drawbar with pin
    • Hoses, Cat XT™
    • Hydraulic oil cooler
    • Hydraulic, steering and brake filtration/screening system
    • Oil sampling valves
    • Product Link™ - Cellular
    • Stairways, fixed-L/R (rear access)
    • Steering, load sensing
    • Vandalism protection caplocks
    • Venturi stack

Attachments

  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Various Blades:
    • Straight blade
    • U-blade
    • Semi U-blade
  • Various Tip And Wheel Arrangements:
    • Paddle
    • Plus
    • Diamond

Pin It on Pinterest

Share This