(317) 545-2151

R1300G Underground Mining Loader

Request a Quote
Download a Product Brochure

Product Specs

Engine

Engine Model
Cat® 3306B DITA
Engine Power - ISO 14396:2002
157 hp
Bore
4.75 in
Stroke
6 in
Displacement
640.75 in³
Note (1)
Power ratings apply at a rated speed of 2,200 rpm when tested under the reference conditions for the specified standard.
Note (2)
All rating conditions are based on ISO/TR14396:2002, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specificat
Note (3)
Engine derate will commence at an altitude of 4500 m (14,763.7 ft).

Operating Specifications

Nominal Payload Capacity
14991 lb
Gross Machine Mass
65482 lb
Static Tipping Load - Straight Ahead - Lift Arms Horizontal
45360 lb
Static Tipping Load - Full Turn - Lift Arms Horizontal
39397 lb
Breakout Force - SAE
26504 lb

Weights

Operating Mass*
45691 lb
Operating Mass* - Front Axle
16810 lb
Operating Mass* - Rear Axle
28881 lb
Operating Mass + Rated Payload*
60682 lb
Operating Mass + Rated Payload* - Front Axle
41105 lb
Operating Mass + Rated Payload* - Rear Axle
19577 lb
Note
*Calculated weights.

Transmission

Forward - 1
2.8 mile/h
Forward - 2
4.8 mile/h
Forward - 3
9.3 mile/h
Forward - 4
16.3 mile/h
Reverse - 1
2.8 mile/h
Reverse - 2
4.8 mile/h
Reverse - 3
9.2 mile/h
Reverse - 4
14.3 mile/h

Hydraulic Cycle Times

Raise
5 s
Dump
2 s
Lower, Empty, Float Down
2.3 s
Total Cycle Time
9.3 s

Bucket Capacities

Dump Bucket - 1
3.2 yd³
Dump Bucket - 2
3.7 yd³
Dump Bucket - 3 - Standard Bucket
4.1 yd³
Dump Bucket - 4
4.4 yd³
Ejector Bucket
3.1 yd³

Turning Dimensions

Outside Clearance Radius
225.1 in
Inner Clearance Radius
111.2 in
Axle Oscillation
10°
Articulation Angle
42.5°

Tires

Tire Size
17.5 × R25

Service Refill Capacities

Engine Crankcase - With Filter
6.6 gal (US)
Transmission
11.9 gal (US)
Hydraulic Tank
23.2 gal (US)
Cooling System
17.7 gal (US)
Front Differential and Final Drives
10 gal (US)
Rear Differential and Final Drives
11.1 gal (US)
Fuel Tank
77.9 gal (US)

Standards

Standards
ROPS/FOPS Certified Cab

Standard Equipment

  • Electrical
    • Alternator, 75-amp
    • Receptacle group, auxiliary start
    • Battery Disconnect Switch, Ground Level
    • Starter, electric, 24-volt
    • Diagnostic Connector
    • Engine Shutdown Switch
    • Lighting:
      – External, front, rear
      – Stop, single
    • Batteries, low maintenance
    • Alarm, reversing
    • Starting and Charging System
  • Tires, Rims, And Wheels
    • Rims:
      – Tubeless, set of four
    • Tires must be selected from the Mandatory Attachments section, choose between:
      – Tire, 17.5 × R25 VSMS L5S Bridgestone
      – Tire, 17.5 × R25, VSDL Bridgestone
  • Operator Environment
    • Caterpillar Electronic Monitoring System (CEMS), (dash instrument panels)
    • Horns, electric
    • Instrumentation/gauges:
      – Speedometer/tachometer
      – Fuel level
      – Hydraulic oil temperature
      – Engine coolant temperature
    • Light, warning, residual brake
    • Pilot Hydraulic Implement Controls, Single Joystick
    • Cab, ROPS and/or FOPS certified
    • Steering and Transmission Integrated Control (STIC™) Steering
    • Seat, Suspension Tee with retractable seat belt
  • Power Train
    • Engine:
      – Cat 3306B six cylinder, diesel
      – DITA (Direct Injection, Turbocharged, Aftercooled)
    • Precleaner, engine air intake
    • Fuel Priming Aid
    • Brakes, full hydraulic enclosed wet multiple-disc (SAFR)
    • Heat Shields
    • Torque Converter
    • Transmission Neutralizer
    • Transmission, automatic planetary power shift (4F/4R)
  • Other Standard Equipment
    • Guards, engine and transmission
    • Bucket Dump (3.1 m3/4.1 yd3)
    • Catalytic Exhaust Purifier/Muffler
    • Cap, Radiator Manual Release
    • Decals, International Picto Graphics
    • Service oil sample
    • Fenders, Front, Rear
    • Firewall
    • Handholds
    • Hydraulic Oil Cooler, Swing Out
    • Valve, drain, transmission oil filter
    • Protection bars, rear frame
    • Radiator Grill, Swing Out

Attachments

  • Tires, Rims, And Wheels
    • Rims:
      – Tube, set of four
      – Spare (Tube or Tubeless)
      – Rim Identification Numbering
  • Optional Equipment
    • After-Treatment Options
      – DPF (Flow Through)
    • Brake Release Arrangements, Includes Steering Release
      – Recovery Hook
      – Recovery Bar
    • Bucket:
      – Cutting Edge, Bolt-On
      – Cutting Edge, Cat Weld On
      – Heel Shrouds, Ejector and Dump Buckets
      – Lip Fully Welded or Tack Welded
      – Mechanically Attached Wear Plate System (MAWPS)
      – Various Sizes, Dump (2.5 m3/3.2 yd3, 2.8 m3/3.7 yd3, 3.4 m3/4.4 yd3), Ejector (2.4 m3/3.1 yd3)
      – Standard Lip or Bolt-On Lip
      – Wear Bars, Ejector and Dump Buckets
      – Wear Liner
    • Covers:
      – Guard, for lift arm and front frame lights
      – Rear Grill (Additional Bolt-On Guard)
    • Draw Bar Attachment, Bolt-On
    • Fast Fill System:
      – Coolant
      – Engine Oil
      – Fuel
      – Hydraulic Oil
      – Transmission Oil
    • Fluids
      – Arctic Fuel
      – Arctic Coolant
    • Lifting Group, Mine Transfer
    • Lubrication System
      – Automatic
      – Centralized
    • Operators Station ROPS/FOPS Enclosed
      – Air Conditioning
      – Cab Pressurizer and Filter
      – Dome Light
      – Door Strut
      – Heater
      – Radio Ready Compartment for Radio and Speakers
      – Wiper Control, Intermittent
    • Park Brake Automatic Activation
    • Park Brake Switch Engagement
      – Push to Apply
      – Pull to Apply
    • Reflective Tape
    • Remote Control Interface (excludes Transmitter and Receiver), Includes Warning Lights (Green)
      – Cattron
      – RCT
    • Reversible Steering
    • Ride Control System
    • Rim
      – Tube Type
      – Tube or Tubeless (chain ready)
      – Spare (Tube or Tubeless)
      – Rim Identification Numbering
    • Secondary Steering System
    • Service Tools
      – Recovery Bar (for use with Brake Release, Recovery Bar System)
      – Reference Parts Manual for Additional Tooling Available
    • Switches
      – Idle Timer
      – Lift Arm Positioner
      – Transmission Neutralizer Override Switch
      – Transmission Pressure ABA Park Brake Engagement
  • Operator Environment
    • Operator's Station ROPS/FOPS Enclosed:
      – Air Conditioning
      – Cab Pressurizer and Filter
      – Dome Light
      – Door Strut
      – Heater
      – Radio Ready Compartment for Radio and Speakers
      – Wiper Control, Intermittent
    • Instrumentation/gauges:
      – Brake pressures
    • Secondary Steering System
  • Power Train
    • Engine:
      – After-Treatment Options – DPF (Flow Through)
    • Reversible Steering
    • Park Brake Automatic Activation
    • Park Brake Switch Engagement – Push to Apply/Pull to Apply
    • Radiator, High Efficiency

Pin It on Pinterest

Share This