Exterior View
Product Specs
Operating Specifications
- Target Payload (100%)
- 101.1 ton (US)
- Top Speed - Loaded
- 40.9 mile/h
- Maximum Working Payload (110%)
- 111.2 ton (US)
- Maximum Allowable Payload (120%)*
- 121.3 ton (US)
- Body Capacity - SAE 2:1
- 83.1 yd³
- Note (1)
- Capacity with flat floor X Body with liner.
- Note (2)
- * Refer to the Caterpillar 10/10/20 Payload Policy for maximum gross vehicle weight limitations.
Engine
- Engine Model
- Cat® C32B
- Gross Power - SAE J1995
- 1025 hp
- Net Power - SAE J1349
- 916 hp
- Bore
- 5.7 in
- Stroke
- 6.4 in
- Displacement
- 1959 in³
- Peak Torque - Speed
- 1200 r/min
- Engine Speed
- 1800 r/min
- Cylinders
- 12
- Engine Power - ISO 14396
- 1008 hp
- Net Torque Rise
- Tier 4: 39%. Tier 2: 37%
- Note (1)
- Power rating applies at 1,800 rpm when tested under the specified condition for the specified standard.
- Note (2)
- Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F).
- Note (3)
- Available as U.S. EPA Tier 4 Final/EU Stage V equivalent, Tier 3/Stage IIIA equivalent, or Tier 2/Stage II equivalent emission standards.
- Note (4)
- Meets China Nonroad Stage III emission standards equivalent to Tier 3 or Tier 2.
Capacity - X Body - 100% Fill Factor
- Struck
- 56.3 yd³
- Heaped (SAE 2:1)*
- 83.8 yd³
- Note (1)
- Contact your local Cat dealer for body recommendation.
- Note (2)
- *ISO 6483:1980
Capacity - Coal Bodies - 100% Fill Factor
- SAE 2:1 - For use with material densities of 1160 kg/m3 (1,950 lb/yd3)
- 116.8 yd³
- SAE 2:1 - For use with material densities of 1040-1160 kg/m3 (1,750-1,950 lb/yd3)
- 139 yd³
- SAE 2:1 - For use with material densities of 950-1040 kg/m3 (1,600-1,750 lb/yd3)
- 144 yd³
- SAE 2:1 - For use with material densities less than 950 kg/m3 (1,600 lb/yd3)
- 164.6 yd³
Capacity - Dual Slope - 100% Fill Factor
- Struck
- 54.8 yd³
- Heaped (SAE 2:1)*
- 78.6 yd³
- Note (1)
- Contact your local Cat dealer for body recommendation.
- Note (2)
- *ISO 6483:1980
Weight Distributions - Approximate
- Front Axle - Empty
- 42 %
- Front Axle - Loaded
- 33 %
- Rear Axle - Empty
- 58 %
- Rear Axle - Loaded
- 67 %
Transmission
- Forward - 1
- 6.6 mile/h
- Forward - 2
- 9.1 mile/h
- Forward - 3
- 11.9 mile/h
- Forward - 4
- 16.6 mile/h
- Forward - 5
- 22.5 mile/h
- Forward - 6
- 30.2 mile/h
- Forward - 7
- 40.9 mile/h
- Reverse
- 7.5 mile/h
- Note
- Maximum travel speeds with standard 27.00R49 (E4) tires.
Final Drives
- Differential Ratio
- 2.736:1
- Planetary Ratio
- 7.0:1
- Total Reduction Ratio
- 19.1576:1
Brakes
- Brake Standards
- ISO 3450-2011
- Brake Surface Area - Front
- 6331 in²
- Brake Surface Area - Rear
- 15828 in²
Service Refill Capacities
- Fuel Tank (1)
- 300 gal (US)
- Fuel Tank (2)
- 350 gal (US)
- Cooling System
- 61 gal (US)
- Crankcase
- 28.7 gal (US)
- Differentials
- 59.9 gal (US)
- Final Drive - Each
- 20 gal (US)
- Steering System - Including Tank
- 14.1 gal (US)
- Brake Hoist System
- 117 gal (US)
- Torque Converter - Transmission System
- 36.5 gal (US)
Body Hoists
- Pump Flow - High Idle
- 120.9 gal/min
- Relief Valve Setting - Raise
- 2750 psi
- Relief Valve Setting - Lower
- 500 psi
- Body Raise Time - High Idle
- 15 s
- Body Lower Time - Float
- 13 s
- Body Lower Time - High Idle
- 13 s
Suspension
- Rear axle - Oscillation
- 5.4 °
- Empty Loaded Cylinder Stroke Front
- 2.9 in
- Empty Loaded Cylinder Stroke Rear
- 2.5 in
Tires
- Standard Tire
- 27.00R49 (E4)
- Note (1)
- Productive capabilities of the 777 truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production.
- Note (2)
- Caterpillar recommends the customer evaluate all job conditions and consult the tire manufacturer for proper tire selection.
ROPS
- ROPS Standards
- Rollover Protective Structure (ROPS) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria.
- FOPS Standards
- Falling Objects Protective Structure (FOPS) meets ISO 3449:2005 Level II FOPS criteria.
Steering
- Turning Diameter - Front
- 83 ft
- Steering Standards
- ISO 5010:2007
- Steer Angle
- 30.5 °
- Turning Circle - Clearance Diameter
- 93 ft
Weights - Approximate
- Target Gross Machine Weight
- 363000 lb
Sound
- Sound Standards (1)
- The operator Equivalent Sound Pressure Level (Leq) is 73 dB(A) when SAE J1166 FEB2008 is used to measure the value for an enclosed cab. This is a work cycle sound exposure level. The cab was properly installed and maintained. The test was conducted with t
- Sound Standards (2)
- The exterior sound pressure level for the standard machine measured at a distance of 15 m (49 ft) according to the test procedures specified in SAE J88:2008, mid‑gear moving operation is 83 dB(A).
- Sound Standards (3)
- Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.
Standard Equipment
-
- Note
-
- Standard and optional equipment may vary. Consult your Cat® dealer for details.
-
- Power Train
-
- Autostall
- Engine idle shutdown
- Air-To-Air Aftercooler (ATAAC)
- Air cleaner with precleaner (2)
- Automatic cold mode idle control
- Electric priming pump
- Electric cold weather start (two starters and four batteries)
- Ether starting aid
- Exhaust, muffler
- Fuel filter/water separator
- Turbocharger (2)
- Braking system:
– Extended life brakes
– Brake wear indicator
– Automatic Retarder Control (ARC) (utilizes oil-cooled, multiple disc brakes)
– Brake release motor (towing)
– Manual retarder (utilizes oil-cooled, multiple disc brakes)
– Oil-cooled, multiple disc (front/rear)
– Parking
– Secondary
– Service - Transmission
– Auto neutral idle
– Advanced Productivity Electronic Control Strategy (APECS) Software
– Electronic Clutch Pressure Control (ECPC) - Part Throttle Shifting
– 7-speed automatic powershift with Torque Shift Management Electronic Clutch Pressure Control
– Body up-shift inhibitor
– Directional shift management
– Downshift inhibitor
– Neutral start switch
– Neutral coast inhibitor
– Reverse shift inhibitor
– Reverse neutralizer during dumping
– Programmable top gear selection
-
- Suspension Systems
-
- Suspension, rear
-
- Electrical
-
- Alarm, backup
- Alternator, 115 ampere
- Auxiliary jump start receptacle
- Batteries, maintenance-free, 12V (4), 200 amp-hour
- Electrical system, 25 AMP, 24V to 12V converter
- Lighting system (LED)
– Backup light
– Directional signals/hazard warning, (front and rear)
– Headlights with dimmer
– Payload, indicator lights
– Operator access courtesy lights
– Side profile lights
– Stop/tail lights
– Service lights
-
- Operator Environment
-
- Air conditioning
- Ashtray and cigarette lighter
- Coat hook
- Cup holders (4)
- Diagnostic connection port, 24V
- Entertainment radio ready
– 5 amp converter
– Speakers
– Antenna
– Wiring harness - Gauges/indicators
– Brake oil temperature gauge
– Coolant temperature gauge
– Hour meter
– Tachometer
– Engine overspeed indicator
– Fuel level
– Speedometer with odometer
– Transmission gear indicator - Heater/defroster (11 070 kCal/43,930 BTU)
- Auto temp control
- Hoist lever
- Horn, electric
- Light – dome
- Light – courtesy
- Load counter, automatic
- Touchscreen Advisor display
- Vital Information Management System (VIMS TM)
- Foot rest
- Mirrors – heated
- Power port, 24V and 12V (2)
- Rollover protective structure (ROPS) cab, insulated/sound suppressed
- Cat Comfort Series III
– Full air suspension
– Retractable 3-point seat belt with shoulder harness - Steering wheel, padded, tilt and telescopic
- Storage compartment
- Sun visor
- Throttle lock
- Window, right side, hinged access/egress
- Electric left side window control
- Windshield wiper (intermittent) and washer
- Tinted, laminated glass
-
- Technology Products
-
- Product LinkTM Ready (Level 1)
- Adaptive economy mode
-
- Guards
-
- Engine crankcase
- Driveline
- Fan and A/C
-
- Fluids
-
- Extended life coolant to –35° C (–30° F)
-
- Other Standard Equipment
-
- Clustered grease fittings
- Body mounting group
- Body safety pin (secures body in up position)
- Body down indicator
- CD-ROM parts book
- Center-mounted rims
- Fuel tank (1136 L/300 gal)
- Ground level battery disconnect
- Ground level engine shutdown
- Ground level grease fittings
- Reservoirs (separate)
– Brake/hoist
– Steering
– Transmission/torque converter - Rims 19.5 × 49
- Rock ejectors
- Supplemental steering (automatic)
- Tie down eyes
- Tow hooks (front)/Tow pin (rear)
- Vandalism protection locks
- Wiggins fast fuel
- Attachment zone
Attachments
-
- Note
-
- Standard and optional equipment may vary. Consult your Cat® dealer for details.
-
- Optional Equipment
-
- Body heat
- Body liners
- Body sideboards
- Cab precleaner
- Cat Engine Brake
- Cold weather packages
- Fluid fill service center
- High intensity discharge (HID)
- Mirrors, convex
- Spare rim
- Visibility package (meets ISO 5006:2017 requirements)
- Wheel chocks
- Work Area Vision System (WAVS)
-
- Operator Environment
-
- Fluid level monitoring
- Truck Production Management System (TPMS)
-
- Technology Products
-
- Tons Kilometer Per Hour/Tons Mile Per Hour (TKPH/TMPH)
- Object Detection (4 cameras, 4 radars)
-
- Other Optional Equipment
-
- Traction Control System (TCS)