Product Specs
Engine
- Maximum Power - 2,100 rpm - ISO 14396
- 249 hp
- Engine Model
- Cat C7.1
- Maximum Gross Power - 2,100 rpm - SAE J1995
- 253 hp
- Maximum Net Power - 2,100 rpm - ISO 9249
- 231 hp
- Engine Torque @ 1,300 rpm - ISO 14396:2002
- 908 ft·lbf
- Gross Torque @ 1,300 rpm - SAE J1995:2014
- 916 ft·lbf
- Maximum Net Torque - 1,300 rpm - ISO 9249
- 863 ft·lbf
- Displacement
- 427 in³
- Note
- Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
- Note (1)
- The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.
- Note (2)
- Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lowercarbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (hy
Weights
- Operating Weight
- 42461 lb
- Note
- Weight based on a machine configuration with with Parallel lift z-bar linkage, Bridgestone 23.5R25 VJT L3 radial tires, full fluids, operator, standard counterweight, ride control cold start, roading fenders, Product Link, front manual differential/open r
Transmission
- Forward - 1
- 4.3 mile/h
- Forward - 2
- 7.5 mile/h
- Forward - 3
- 12 mile/h
- Forward - 4
- 16 mile/h
- Forward - 5
- 24.5 mile/h
- Reverse - 1
- 4.3 mile/h
- Reverse - 2
- 7.5 mile/h
- Reverse - 3
- 16 mile/h
- Note
- Maximum travel speed in standard vehicle with empty bucket and standard L3 tires with 787 mm (31 in) roll radius
Sound
- Operator Sound Pressure Level - ISO 6396:2008
- 70 dB(A)
- Exterior Sound Power Level - ISO 6395:2008
- 70 dB(A)
- Operator Sound Pressure Level - ISO 6396:2008 ¹
- 69 dB(A)
- Exterior Sound Power Level - ISO 6395:2008 ¹
- 107 dB(A)
- Note
- ¹Including countries that adopt the EU and UK Directives.
- Note (1)
- ¹Exterior Sound Power Level - European Union Directive 2000/14/EC and UK Noise Regulation 2001 No. 1701
Air Conditioning System
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg (3.5 lb) of refrigerant which has a CO2 equivalent 2.288 metric tonnes (2.522 tons).
Operating Specifications
- Static Tipping Load - Full 40° Turn - With Tire Deflection
- 24694 lb
- Static Tipping Load - Full 40° Turn - No Tire Deflection
- 26369 lb
- Breakout Force
- 40690 lbf
- Note
- For a machine configuration as defined under “Weight.”
- Note (1)
- Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing. Service Refill Capaciti
Service Refill Capacities
- Fuel Tank
- 68.6 gal (US)
- DEF Tank
- 4 gal (US)
- Cooling System
- 14.3 gal (US)
- Crankcase
- 5.5 gal (US)
- Transmission
- 11.4 gal (US)
- Differential - Final Drives - Front
- 11.4 gal (US)
- Differential - Final Drives - Rear
- 11.4 gal (US)
- Hydraulic Tank
- 25.6 gal (US)
Hydraulic System
- Implement System - Maximum Pump Output at 2,340 rpm
- 85 gal/min
- Implement System - Maximum Operating Pressure
- 4250 psi
- Hydraulic Cycle Time - Total
- 9.1 s
Dimensions - Standard Lift
- Height - Top of Hood
- 8.83 ft
- Height - Top of ROPS
- 11.33 ft
- Ground Clearance
- 1.08 ft
- Wheel Base
- 11 ft
- Overall Length - Without Bucket
- 23.08 ft
- Hinge Pin Height at Carry Height
- 2 ft
- Hinge Pin Height at Maximum Lift
- 13.08 ft
- Lift Arm Clearance at Maximum Lift
- 10.67 ft
- Rack Back - Maximum Lift
- 59 °
- Rack Back - Carry Height
- 49 °
- Width over Tires (Loaded)
- 9.33 ft
- Tread Width
- 7 ft
- Note
- All dimensions are approximate and based on machine equipped with 3.1 m3 (4.1 yd3 ) general purpose bucket with BOCE and Bridgestone 23.5R25 VJT L3 radial tires.
Dimensions - High Lift
- Height - Top of Hood
- 8.83 ft
- Height - Top of ROPS
- 11.33 ft
- Ground Clearance
- 1.08 ft
- Wheel Base
- 11 ft
- Overall Length - Without Bucket
- 24.58 ft
- Hinge Pin Height at Carry Height
- 2.5 ft
- Hinge Pin Height at Maximum Lift
- 14.75 ft
- Lift Arm Clearance at Maximum Lift
- 11.83 ft
- Rack Back - Maximum Lift
- 56 °
- Rack Back - Carry Height
- 49 °
- Width over Tires (Loaded)
- 9.33 ft
- Tread Width
- 7 ft
- Note
- All dimensions are approximate and based on machine equipped with 3.1 m3 (4.1 yd3 ) general purpose bucket with BOCE and Bridgestone 23.5R25 VJT L3 radial tires.
Standard Equipment
-
- Note
-
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
- Electrical
-
- Lights: halogen, 4 work lights, 2 front roading lights with turn signals, 2 rear-vision lights
- Starting and charging system, 24V
- Starter, electric, heavy duty
-
- Hydraulics
-
- Steering system, load sensing with dedicated variable displacement piston pump
- Implement system, load sensing with variable displacement piston pump
- Oil sampling valves, Cat XT™ hoses
- Ride control, dual accumulators
-
- Linkage
-
- *Not all configurations available in all regions, subject to availability
- Kickouts: lift and tilt
- Parallel Lift, Z-bar*
-
- Monitoring System
-
- Primary touchscreen monitor (Cat Payload, quad screens, machine settings & messages)
- Front dash with analog gauges, LCD display, and warning lights
-
- On-board Technologies
-
- Cat Payload scale
- Application Profiles
- Operator ID & machine security
- Autodig with Auto Set Tires
- Job Aids
-
- Operator Environment
-
- Cab, pressurized, sound suppression
- HMU steering wheel
- Visibility: mirrors, rear-vision camera
- Window, front, laminated
- Window cleaning platform, front
- Touchscreen display
- Air conditioner, heater, defroster (auto temp, fan)
- EH implement controls, parking brake
- Sun visor, front and rear, retractable
- Seat, cloth, air suspension
-
- Power Train
-
- Fuel-water separator and secondary fuel filter
- Service brakes, hydraulic, fully enclosed wet disc, wear indicators, Integrated Braking System (IBS)
- Engine, air precleaner
- Park brake, caliper on front axles, spring applied–pressure released
- Transmission, countershaft, automatic powershift
- Axles, front differential lock
- Torque converter with lock-up
- Electric fuel priming pump
- Cat C7.1 engine
Attachments
-
- Note
-
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
- Additional Equipment
-
- Guards: power train, crankcase, cab, cylinders, rear
- Cat Autolube system
- Fenders, extensions or roading
- Wheel chocks
- Toolbox
- Secondary steering system, electrical**
- **Standard or optional depending on region. Consult your dealer.
- Biodegradable hydraulic oil
- High-speed oil change system
- Rear cab access
-
- Electrical
-
- Cold start, 120V or 240V
- Warning beacon
- Lights: LED
- Reversing strobe lights
-
- Hydraulics
-
- 3rd and 4th auxiliary functions with ride control
- Quick coupler control
-
- Linkage
-
- *Not all configurations available in all regions, subject to availability
- Standard lift, Z-bar*
- High Lift available with both linkages*
-
- On-board Technologies
-
- Cat Payload Printer
- Controls Help and eOMM
- Cat Advanced Payload
-
- Operator Environment
-
- Mirrors, heated
- Dedicated rearview screen
- Entertainment radio
- Seat, leather/cloth, air suspension, heated/cooled
- Full cab window guard
- Windows, front, heavy duty
- Steering, joystick
- Cat Detect rear radar system
- CB radio ready
- Door, remote opening system
- Multiview (360°) vision system
- Seat, suede/cloth, air suspension, heated
-
- Power Train
-
- Turbine, air precleaner
- Axles, ecology drains, AOC ready, extreme temperature seals
- Radiator, high debris
- Axles, auto differential locks front and rear
- Axles, oil cooler
- Cooling fan, reversible
-
- Special Configurations
-
- Tunneling***
- Corrosion resistant
- Auxiliary Counterweight
- ***Japan only
- Waste and industrial
- Forestry