Exterior View
Product Specs
Engine
- Engine Model
- C15 Cat®
- Peak Power Speed
- 1600
- Peak Power Speed - Gross - SAE J1995
- 456 hp
- Engine Power - ISO 14396:2002
- 449 hp
- Net Power - SAE J1349:2011
- 373 hp
- Rated Speed
- 2000
- Rated Speed - 2,000 rpm - EEC 80/1269
- 373 hp
- Rated Speed - 2,000 rpm - EEC 80/1269 (DIN)
- 378 hp
- Rated Speed - 2,000 rpm - ISO 9249
- 373 hp
- Rated Speed - 2,000 rpm - ISO 9249 (DIN)
- 378 hp
- Bore
- 5.4 in
- Stroke
- 6.75 in
- Displacement
- 927 in²
- Peak Torque - 1,200 rpm - SAE J1995
- 1778 lb/ft
- Torque Rise
- 16%
- Emissions
- U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards and Brazil MAR-1 emission standards, equivalent to China Nonroad Stage III, U.S. EPA Tier 3 and EU Stage IIIA
Transmission
- Transmission Type
- Cat planetary power shift
- Forward - 1
- 5 mile/h
- Forward - 2
- 8 mile/h
- Direct Drive - Forward 2
- 8 mile/h
- Direct Drive - Forward 3
- 14 mile/h
- Direct Drive - Forward 4
- 24 mile/h
- Reverse - 1
- 5 mile/h
- Reverse - 2
- 8 mile/h
- Direct Drive - Reverse 2
- 9 mile/h
- Direct Drive - Reverse 3
- 16 mile/h
- Direct Drive - Reverse 4
- 25.4 mile/h
Operating Specifications
- Operating Weight - Standard
- 97785 lb
- Operating Weight - High Lift
- 104005 lb
- Rated Payload - Standard (Quarry Face)
- 11 ton (US)
- Rated Payload - Loose Material (Standard)
- 14 ton (US)
- Rated Payload - High Lift (Quarry Face)
- 11 ton (US)
- Rated Payload - Loose Material (High Lift)
- 12.1 ton (US)
- Bucket Capacity Range
- 5-10,3 m³ (6,5-13,5 yd.³)
- Cat Truck Match - Standard
- 770/735/740/745
- Cat Truck Match - High Lift
- 772/773
Hydraulic System - Lift/Tilt
- Lift/Tilt System - Circuit
- Load Sense
- Lift/Tilt System - Pump
- 2 × 110 cc variable displacement
- Maximum Flow at 2,165 rpm
- 123 gal/min
- Relief Valve Setting - Lift/Tilt
- 4050 psi
- Lift Cylinder - Bore
- 7.5 in
- Lift Cylinder - Stroke
- 45 in
- Tilt Cylinder - Bore
- 6.7 in
- Tilt Cylinder - Stroke
- 28.4 in
Hydraulic Cycle Times
- Rack Back
- 4.5 s
- Raise
- 9 s
- Dump
- 3.5 s
- Lower
- 5.2 s
- Lower Float Down
- 4.3 s
- Total Hydraulic Cycle Time
- 21.3 s
Hydraulic System - Steering
- Steering System - Circuit
- Load Sense
- Steering System - Pump
- Piston, variable displacement
- Maximum Flow at 1,400 rpm
- 52 gal/min
- Steering Cut Off Pressure
- 4000 psi
- Total Steering Angle
- 70°
Air Conditioning System
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
Axles
- Front
- Fixed
- Rear
- Trunnion
- Oscillation Angle
- ±12.5°
- Oscillation Angle - Chain Arrangement
- ±8.5°
Brakes
- Brakes
- ISO 3450:2011
Service Refill Capacities
- Fuel Tank
- 141 gal (US)
- Fuel Tank - Short Lift
- 127 gal (US)
- Cooling Systems
- 26 gal (US)
- Crankcase
- 9 gal (US)
- Diesel Exhaust Fluid Tank
- 6 gal (US)
- Transmission
- 20 gal (US)
- Axle Oil - Differentials and Final Drives - Front
- 49 gal (US)
- Axle Oil - Differentials and Final Drives - Rear
- 45 gal (US)
- Hydraulic System Factory Fill
- 87 gal (US)
- Hydraulic System - Tank Only
- 34 gal (US)
Operator's Cab
- ROPS/FOPS
- ROPS/FOPS meet ISO 3471:2008 (ROPS) and ISO 3449:2005 Level II (FOPS)
Sound Performance - Standard
- Operator Sound Level (ISO 6396)
- 72 dB(A)
- Machine Sound Level (ISO 6395)
- 112 dB(A)
- Note
-
- The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
- Hearing protection may be neede
Sound Performance - Suppression
- Operator Sound Level (ISO 6396)
- 72 dB(A)
- Machine Sound Level (ISO 6395)
- 110 dB(A)
- Note
-
- The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
- Hearing protection may be neede
Dimensions (Approximate) - Standard Lift Linkage
- Ground to Top of ROPS
- 13.5 ft
- Ground to Top of Exhaust Stacks
- 13.3 ft
- Ground to Top of Hood
- 10.7 ft
- Ground to Center of Front Axle
- 3.2 ft
- Ground to Fuel Tank Clearance
- 2.3 ft
- Ground to Lower Hitch Clearance
- 1.5 ft
- Reach - Maximum Lift
- 7.1 ft
- Clearance at Maximum Lift
- 10.1 ft
- B-Pin Height - Maximum Lift
- 16.1 ft
- Maximum Overall Height - Bucket Raised
- 22.4 ft
- Rear Axle - Centerline to Bumper
- 10.3 ft
- Wheel Base
- 12.5 ft
- Maximum Overall Length
- 36.6 ft
- Front Axle Centerline to Bucket Tip
- 13.8 ft
- Note
-
- All dimensions are approximate.
- Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
Dimensions (Approximate) - High Lift Linkage
- Ground to Top of ROPS
- 13.5 ft
- Ground to Top of Exhaust Stacks
- 13.3 ft
- Ground to Top of Hood
- 10.7 ft
- Ground to Center of Front Axle
- 3.2 ft
- Ground to Fuel Tank Clearance
- 2.3 ft
- Ground to Lower Hitch Clearance
- 1.5 ft
- Reach - Maximum Lift
- 7.4 ft
- Clearance at Maximum Lift
- 11.6 ft
- B-Pin Height - Maximum Lift
- 17.6 ft
- Maximum Overall Height - Bucket Raised
- 23.9 ft
- Rear Axle - Centerline to Bumper
- 10.3 ft
- Wheel Base
- 12.5 ft
- Maximum Overall Length
- 38 ft
- Front Axle Centerline to Bucket Tip
- 15.3 ft
- Note
-
- All dimensions are approximate.
- Specs are calculated with a 6.1 m³ (8.0 yd³) rock bucket.
Dimensions (Approximate) - Quick Coupler and 6.1 m³ (8.0 yd³) Bucket
- Ground to Top of ROPS
- 13.5 ft
- Ground to Top of Exhaust Stacks
- 13.3 ft
- Ground to Top of Hood
- 10.7 ft
- Ground to Center of Rear Axle
- 3.2 ft
- Ground to Fuel Tank Clearance
- 2.3 ft
- Ground to Lower Hitch Clearance
- 1.5 ft
- Reach at Maximum Lift
- 8 ft
- Clearance at Maximum Lift
- 10.7 ft
- B-Pin Height at Maximum Lift
- 15 ft
- Maximum Overall Height, Bucket Raised
- 20.9 ft
- Rear Axle Center Line to Bumper
- 10.3 ft
- Wheel Base
- 12.5 ft
- Maximum Overall Length
- 35 ft
- Front Axle Centerline to Bucket Tip
- 12.2 ft
Dimensions (Approximate) - Quick Coupler and Fork
- Ground to Top of ROPS
- 13.5 ft
- Ground to Top of Exhaust Stacks
- 13.3 ft
- Ground to Top of Hood
- 10.7 ft
- Ground to Center of Rear Axle
- 3.2 ft
- Ground to Fuel Tank Clearance
- 2.3 ft
- Ground to Lower Hitch Clearance
- 1.5 ft
- B-Pin Height at Maximum Lift
- 15 ft
- Rear Axle Center Line to Bumper
- 10.3 ft
- Wheel Base
- 12.5 ft
- Maximum Overall Length
- 35.4 ft
- Front Axle Centerline to Bucket Tip
- 12.6 ft
Standard Equipment
-
- Note
-
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
- Electrical
-
- Alarm, back-up
- Alternator, single 145 amp
- Batteries, dry
- Converter, 10/15 amp, 24V to 12V
- Lighting system (halogen, work lights, access and service platform lighting)
- Starting and charging system, 24V
- Starter emergency start receptacle
-
- Operator Environment
-
- Graphical Information Display, displays real time operating information, performs calibrations and customizes operator settings
- Air conditioner
- Rear vision camera system
- Cab, sound suppressed and pressurized, integrated rollover protective structure (ROPS/FOPS) radio ready for entertainment, includes antenna, speakers and converter (12-volt 5-amp) and power port
- Controls, lift and tilt function
- Heater, defroster
- Horn, electric
- Instrumentation, gauges:
– Coolant temperature
– Fuel level
– DEF level
– Hydraulic oil temperature
– Power train oil temperature - Light, cab, dome
- Lunchbox, beverage holders
- Mirrors, rearview (externally mounted)
- Seat, Cat Comfort (cloth), air suspension, six-way adjustable
- Seat belt minder
- Seat belt, retractable, 76 mm (3 in) wide
- STIC Control System
- UV glass
- Transmission gear indicator
- Wet-Arm wipers/washers (front and rear):
– Intermittent front and rear wipers - Lights, directional
-
- Power Train
-
- Cat Production Measurement ready
- Brakes, oil-cooled, multi-disc, service/secondary
- Case drain screens
- Crankcase guard
- Electro hydraulic parking brake
- Engine, C15 MEUI diesel, turbocharged/aftercooled
- Ground level engine shutoff
- Turbine precleaner, engine air intake
- Starting aid, ether, automatic
- Torque converter, Neutralizer
- Transmission, planetary powershift, 4F/3R electronic control
- Manual switch and automatic fuel priming
-
- Other
-
- Automatic bucket lift kickout/positioner
- Hydraulically driven demand fan
- Couplings, Cat O-ring face seals
- Doors, service access (locking)
- Ecology drains for engine, radiator, hydraulic tank
- Fuel tank, 535 L (141 gal)
- Hitch, drawbar with pin
- Hoses, Cat XT™
- Hydraulic, steering and brake filtration/screening system
- Cat Clean Emission Module
- Oil sampling valves
- Premixed 50% concentration of extended life coolant with freeze protection to –34° C (–29° F)
- Rear access to cab and service platform
- Steering, load sensing
- Toe kicks
- Vandalism protection caplocks
Attachments
-
- Note
-
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
- Power Train
-
- –50° C (–58° F) antifreeze
- Engine oil change system, high speed, Wiggins
- Engine block heater 120V or 240V
- High ambient cooling – software
- Cat Production Measurement
-
- Miscellaneous Attachments
-
- Front and rear roading fenders
- Fast fill fuel system (Shaw-Aero)
- Cold Weather Starting (extra two batteries)
-
- Other Optional Configurations
-
- Aggregate Handler
- Block Handler
-
- Operator Environment
-
- Cab powered precleaner
- Cat Detect Vision
- AM/FM/CD/MP3 radio
- Satellite Sirius radio with Bluetooth
- LED warning strobe
- CB radio ready
- Window pull down visor
- Handrail mounted mirrors