MD6200 Rotary Blasthole Drill Specifications

Pull-Down/Hoisting Capacity

Pull-Down Capacity

Up to 15 876 kg (Up to 35,000 lb)

Specifications

Hole Diameter

140-200 mm (5.5-7.87 in)

Engine

Cat© C18

Bit Load

Up to 16 964 kg (37,400 lb)

Basic Specs

U.S. EPA Tier 2 Equivalent - Engine

C18 @ 1,800 rpm

U.S. EPA Tier 2 Equivalent - Emissions

U.S. EPA Tier 2 equivalent

U.S. EPA Tier 4 Final - Engine

C18 @ 1,800 rpm

U.S. EPA Tier 4 Final - Emissions

U.S. EPA Tier 4 Final

Compressor - Rotary Drilling

32.6 cmm (1,150 cfm) @ 8.6 bar (125 psi)

Angle Drilling Available

30 degrees to 0 degrees in 5-degree increments

U.S. EPA Tier 4 Final - Power Rating (ISO 14396)

589 hp

U.S. EPA Tier 2 Equivalent - Power Rating (ISO 14396)

587 hp

Bit Load (single-Pass)

37400 lb

Hoist Speed

4.3 ft/s

Hole Diameter Range

140-200 mm (5.5-7.87 in)

Hole Depth Range - Single-Pass Depth

36 ft

Compressor - DTH Drilling

29.7 m_/min (1,050 ft_/min) @ 24.1 bar (350 psi)

Pull-DownCapacity

Up to 15 876 kg (Up to 35,000 lb)

Hoist Capacity

Up to 11 907 kg (Up to 26,250 lb)

Hole Depth Range - Multi-Pass Depth

Down to 47.58 m (Down to 156 ft)

Compressor Choices

DTH Drilling

Includes tool lubrication system

Rotary Drilling

Optional tool lubrication system

Note

With the compressor's electronic controls plus variable volume control, the operator can adjust air output to reach optimal match of tool, flushing air and ground conditions. Both high and low pressure compressors contain this feature.

Rotary Drilling - 1150 cfm/125 psi

32.6 cmm (1,150 cfm) @ 8.6 bar (125 psi)

DTH Drilling - 1050 cfm/350 psi

29.7 cmm (1,050 cfm) @ 24.1 bar (350 psi) with 113.5 L (30 gal) tool oiler

Receiver Tank Choices

Choice (1)

Low pressure 8.6 bar (125 psi)

Choice (2)

High pressure 24.1 bar (350 psi)

Cooling

Components (1)

Coolers with easy cleaning access

Components (2)

All cooler core sections are replaceable

Components (3)

Functional in ambient temperature of up to 52� C (125� F)

Components (4)

Automatic variable speed fan control

Climate Choices

Climate Level 1 Standard Fluids and Lubricants (1)

Rated down to -1C (30 F)

Climate Level 1 Standard Fluids and Lubricants (2)

Withstands high heat up to 52 C (125 F)

Climate Level 2 Arctic Fluids and Lubricants, Engine Block and Manifold Heater 120V or 240V

Rated down to -18 C (0 F)

Frame and Work Deck

Features (1)

Jacks, mast pivot and deck are welded integrally to mainframe for maximum durability and long life

Features (2)

Slip resistant surfaces

Features (3)

Fuel tank capacity 833 L (220 gal)

Components (1)

Three leveling jacks provide leveling on a 7� bench (any orientation)

Components (2)

Heavy duty tow hooks (non-drill end)

Components (3)

Four (4) lift lugs, for use with cables or chains

Frame Access Choices

Choice (1)

Fixed access steps to the cab area

Choice (2)

Small platform to the cab includes fixed access steps

Choice (3)

Platform access to the cab with full length service access walkway includes fixed access steps and self-closing gates

Drill Deck Misc.

Components (1)

Drill pipe thread greaser with remote fill tank that also accommodates disposable grease bucket

Undercarriage

Model

Cat® 336 Excavator type

Carrier Rollers

Three (3)

Triple Grousers (1)

600 mm (23.6 in); 0.89 bar (12.6 psi) ground pressure

Lower rollers

Eight (8)

Travel Speed - High

2 mile/h

Travel Speed - Low

1.3 mile/h

Drawbar Pull

262 000 Nm (193,241 lbf-ft)

Components (1)

Track chain guards and guides

Hydraulics

Components (1)

Two (2) main pumps: 85 cc (piston with proportional electronic controls)

Components (2)

One (1) auxiliary circuit pump: 45 cc (piston, load sensing)

Components (3)

One (1) fan pump: 45 cc (piston with proportional electronic controls)

Components (4)

One (1) charge pump: 73.8 cc (gear, fixed displacement)

Components (5)

Scheduled Oil Sampling (S-O-S SM) ports

Engine Features

Feature (2)

Ether starting aid

Feature (3)

Tier 4 Final package complete with DEF/Engine Shutdown Control Package

Feature (1)

Dual starter motors

Drill Pipe

9.14 m (30 ft) pipes - Accepts quantity of four (4) - Option 5

6 in

9.14 m (30 ft) pipes - Accepts quantity of four (4) - Option 4

5.5 in

Dust Control Choices

High Volume Water Injection - Maximum - Tank Below Deck - Capacity

200 gal (US)

High Volume Water Injection - Maximum - Tank Above Deck - Capacity

200 gal (US)

Water Injection - Tank Mounted Below Front Deck - Components

Water flow meter, volume control, tank fill level indicator

Water Injection - Tank Mounted Below Front Deck

200 gal (US)

High Volume Water Injection - Maximum - Tanks Total Capacity

400 gal (US)

Water Injection plus Dust Collector (1)

76.5 cmm (2,700 cfm) dust collector; includes standard water injection

Water Injection plus Dust Collector (2)

Self-cleaning filters, dust chute clean-out door

Choices (1)

Static dust curtains, four sides boxed enclosed

Choices (2)

Dust curtain hydraulic lifters raise front and rear dust curtains (option) (recommended with dry dust collector)

Choices (3)

Tram off spray system (option)

Tool Package Rotary

Components (7)

Drill tool lubricator (optional)

Components (1)

One-piece roller deck bushing

Components (2)

Pipe positioner clamps

Components (3)

Deck wrench

Components (4)

Bit sub

Components (5)

Top sub

Components (6)

Pipe wiper seal

Mast Packages

Single-Pass Depth

36 ft

Multi-Pass Depth

Down to 47.58 m (Down to 156 ft)

Pulldown - Rated Single Cylinder Pull-Down/Hoist System

Up to 15 876 kg (Up to 35,000 lb)

Hoist

Up to 11 907 kg (Up to 26,250 lb)

Tool Package DTH

Components (8)

Top sub

Components (7)

Drill tool lubricator is included with selection of DTH Compressor

Components (1)

Two-piece bushing

Components (2)

Pipe positioner clamps

Components (3)

Deck wrench

Components (4)

Shock sub

Components (5)

Cross over subs

Components (6)

Pipe wiper seal

Dimensions (Approximate)

Width cab end*

13.7 ft

Width non-cab end

11.7 ft

Height mast up

54.3 ft

Body Length

31 ft

Length mast down

57.5 ft

Height mast down

11.75 ft

Mast only length

52.1 ft

Note

*Contact the factory for width with platform access to cab or service platform walkway.

Mast and Pipe Carousel Features

Features (1)

Pipe carousel:
Accepts quantity of four (4) 9.14 m (30 ft) pipes

Features (2)

Standard angle drilling package (0 to 30 degrees, in�5-degree�increments)

Features (4)

Hydraulically actuated, self-indexing pipe carousel accepts pipe diameters up to 152 mm (6.0 in)

Features (5)

Drills strings configured for bit changes above deck

Features (6)

Single cylinder pulldown/hoist system

Features (7)

Sliding deck wrench assembly

Features (8)

Configured with roller deck bushing (for low pressure/tricone drilling)

Features (9)

Two-piece deck bushing (for high pressure DTH drilling)

Features (10)

Overhead winch with cable and hook plus remote control; variable speed drive with a 1361 kg (3,000 lb) rating

Features (11)

Variable grip hydraulic break out wrench grip range 101-152 mm (4.0-6.0 in)

Features (12)

Closed circuit camera mounted in mast to view pipe carousel/top drive operation

Features (13)

Pipe positioner for angle drilling, multi-pass pipe handling

Features (14)

Manual pipe catcher: One (1) wire rope, pipe catcher, pipe positioner, optional manual bit basket

Rotary Head Top Drive System

Torque - Single Motor

6166 lb/ft

Rotation Speed

0-150 rpm

Components (1)

Rotary torque control

Components (2)

Virtual rotary head travel interlocks

Components (3)

Virtual rotary head travel interlocks

Operator Environment

Cab Design

Falling Object Protective Structure (FOPS) certified cab includes:
- Rubber shock-mounts to absorb mechanical vibration
- Operator station design that integrates an ergonomic seat, joystick controls with full instrumentation, dual 254 mm (10 in) hig

Cab Packages

Standard configuration includes a fabric seat, removable floor mat, single pane window glass and driller window guard
Premium configuration includes a leather seat with heat and ventilation, heavy duty suspension, dual pane window glass a

Seating

- Swivel seat is fully ergonomic, with tilt (5° adjustment), lumbar support, and fore/aft seat adjustment 80 mm (3.1 in)
- Seat locks and has two point retractable, 76 mm (3 in) seat belt

Windows

- Large windows on the front, rear and right cab side; full length drill window with guard
- Window shades (option)
- Windshield wiper with a common washer tank
- Manometer Pressure Gauge (option)

Lighting

- LED interior lights, backlit joysticks and keypads
- Flood lights for the drill perimeter; area spotlights
- Mast beacon and tram flashing strobe light (option)

HVAC

- Floor heating vent
- Filter access from deck, 500 hour service interval
- Defogging HVAC vents on main window

Cameras

- Three (3) CC cameras (front, right and left sides) provide 360° visibility from operators seat; camera on the mast to view pipe carousel/top drive operation

Operating System Controls - Standard

Components (1)

Electric controls for drilling, tramming, leveling plus auxiliary functions

Components (2)

Rotary torque control

Components (3)

Virtual rotary head travel stops

Components (4)

Pipe positioner engaged/disengaged indicator

Components (5)

Drill depth meter

Components (6)

Drill performance and display system

Components (7)

Delayed engine shut down

Components (8)

Filter indicators for hydraulic, fuel, compressor and engine

Components (9)

Jack pressure sensors

Components (10)

Data logging of machine health with warnings and fault code records with export capability

Components (11)

Dust suppression control

Components (12)

Mast lock indicator

Components (13)

ECM proportional fan speed control system

Components (14)

Tram interlock, machine stability limits

Components (15)

Tram interlock, pipe in hole

Components (16)

Tram interlock, mast up and locked or down and parked

Components (17)

Tram interlock, jacks retracted

Components (18)

Tram interlock, winch parked

Components (19)

Cab environment controls (AC, heat, fan speeds)

Components (20)

Pre wired for Terrain and Autonomous Operation

Automation and Technology

Type (1)

Autonomous ready

Components (1)

Drill depth meter

Components (2)

Drill Assist Automated Functionality (onboard technology):
- Auto Level (with auto retract jacks)
- Auto Mast (raise, lower and lock into place)
- Auto Dril (single pass)

Components (3)

Cat Terrain ready

Components (4)

Product Link™ Elite

Safety and Security

Feature (1)

Approach angle of 15-degrees facilitates loading and unloading on a lowboy

Components (1)

Seven (7) emergency stop buttons

Components (2)

Hinged window guard over the full length of the front drill window

Components (3)

Conditional safety interlocks

Components (4)

Self-closing gates

Components (5)

Electric horn activated by push button in the cab

Components (6)

Automatic, audible tram alarm

Components (7)

Battery disconnect and starter switches can be locked out

Components (8)

Air hose retention devices

Components (9)

Slip resistant platform surfaces

Components (10)

Machine lifting provisions

Components (11)

FOPS Certified Operator Cab

Service Packages

Package (1)

Basic Package: Centralized manual lubrication for all pivot points, gravity fill for fuel and water

Package (2)

Standard Package: Automated lubrication system, fast fill for fuel and water (option)

Package (3)

Premium Package: Automated lubrication system, fast fill fuel and water, service center for lubricant drain and fill plus blowdown hose (option)

Weights

Working Weight Range

40 823 - 45 359 kg (90,000 - 100,000 lb)