Product Specs
Engine
- Engine Model
- Cat C3.6
- Power - Net
- 80 hp
- Displacement
- 220 in³
- Net Power - 2,200 rpm - SAE J1349
- 80 hp
- Net Power - 2,200 rpm - ISO 9249/EEC 80/1269
- 80 hp
- Power Train
- Hydrostatic
- Note (1)
- Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
- Note (2)
- All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.
Weights
- Operating Weight
- 17855 lb
- Operating Weight - LGP
- 18839 lb
- Note (1)
- Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.
- Operating Weight - LGP, 762 mm/30 in
- 19295 lb
- Note (2)
- For machine with ripper, add 554 kg (1,222 lb).
Transmission
- Drive Pumps
- 1
- Maximum Travel Speed - Reverse
- 6.2 mile/h
- Relief Valve Settings
- 7033 psi
- Maximum Travel Speed - Forward
- 5.6 mile/h
- Track Motors
- 2
Hydraulic Controls
- Pump Output
- 17.2 gal/min
- Relief Valve Settings
- 2988 psi
Ripper
- Type
- Parallelogram
- Number of Shanks
- 3
- Height
- 6.5 in
- Weight
- 1222 lb
- Maximum Ground Clearance Under Tip
- 17.6 in
- Maximum Digging Depth
- 13.3 in
- Overall Width
- 67.3 in
- Maximum Reach - Ground Line
- 30.2 in
Dimensions
- Dozer Height - LGP
- 108.9 in
- Width of Dozer (standard shoes, no blade) - LGP
- 92.9 in
- Dozer Height - LGP, 762 mm (30 in)
- 108.9 in
- Dozer Height - Standard
- 108.9 in
- BLADE: Blade Capacity (SAE) - LGP
- 2.17 yd³
- BLADE: Blade Lift Height - LGP
- 28.7 in
- BLADE: Maximum Tilt - LGP
- 17.2 in
- BLADE: Blade Width - LGP
- 124 in
- Ground Clearance - LGP
- 13 in
- BLADE: Blade Width at Maximum Angle - LGP
- 113.1 in
- BLADE: Digging Depth - LGP
- 23 in
- Track Gauge - LGP
- 67.9 in
- Ground Clearance - LGP, 762 mm (30 in)
- 13 in
- BLADE: Blade Height - LGP
- 33.8 in
- Overall Length - With Blade - LGP, 762 mm (30 in)
- 167.8 in
- Track Gauge - LGP, 762 mm (30 in)
- 73 in
- BLADE: Blade Cutting Edge Angle, Adjustable - LGP
- 52° to 58°
- BLADE: Maximum Angle (either side) - LGP
- 25°
- Overall Length - With Blade - LGP
- 167.8 in
- BLADE: Blade Width at Maximum Angle - Standard
- 95.2 in
- BLADE: Digging Depth - Standard
- 23.2 in
- BLADE: Blade Width - Standard
- 104.2 in
- BLADE: Blade Lift Height - Standard
- 28.7 in
- Ground Clearance - Standard
- 13 in
- BLADE: Blade Cutting Edge Angle, Adjustable - Standard
- 52° to 58°
- BLADE: Maximum Angle (either side) - Standard
- 25°
- BLADE: Maximum Tilt - Standard
- 14.5 in
- BLADE: Blade Capacity (SAE) - Standard
- 1.99 yd³
- Note
- *Abrasion Undercarriage
- Track Gauge - Standard
- 58.9 in
- BLADE: Blade Height - Standard
- 35.8 in
- Overall Length - With Blade - Standard
- 168 in
- Note
- With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in)
- Length of Basic Dozer (without blade) - LGP, 762 mm (30 in)
- 129.6 in
- Width of Dozer (standard shoes, no blade) - Standard
- 74.8 in
- Length of Basic Dozer (without blade) - Standard
- 129.6 in
- Length of Basic Dozer (without blade) - LGP
- 129.6 in
- Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in)
- 94.9 in
Cab
- FOPS
- ISO 3449:2005 Level II
- ROPS
- ISO 3471:2008
Undercarriage
- Length - Track on Ground - LGP, 762 mm (30 in)
- 89 in
- Length - Track on Ground - LGP
- 89 in
- Track Gauge - LGP
- 68 in
- Shoe Width - LGP, 762 mm (30 in)
- 30 in
- Track Gauge - LGP, 762 mm (30 in)
- 73 in
- Shoe Width - LGP
- 25 in
- Track Gauge
- 59 in
- Shoe Width - Standard
- 16 in
- Ground Pressure - LGP
- 4.3 psi
- Ground Pressure - LGP, 762 mm (30 in)
- 3.7 psi
- Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage
- 43
- Number of Rollers - Each Side
- 6
- Length of Track on Ground
- 89 in
- Number of Shoes - Each Side - Abrasion Undercarriage
- 38
- Ground Pressure
- 6.45 psi
Service Refill Capacities
- Final Drive - Each - LGP
- 2.6 gal (US)
- Cooling System
- 4.2 gal (US)
- Diesel Exhaust Fluid (DEF) Tank
- 4.9 gal (US)
- Transmission - Hydraulic Tank
- 23.8 gal (US)
- Crankcase - With Filter
- 2.8 gal (US)
- Fuel Tank
- 51.5 gal (US)
- Final Drives - Each Side
- 2.6 gal (US)
Air Conditioning System
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
Retrieval Winch
- Drum Diameter
- 8 in
- Drum Width
- 9.65 in
- Throat Clearance
- 5.6 in
- Winch Length
- 35.63 in
- Overall width
- 27.91 in
- Weight
- 1747 lb
- Maximum Line Pull - Full Drum
- 79 ft/min
- Drum Capacity - Recommended Cable
- 277 ft
- Maximum Line Pull - Bare Drum
- 50 ft/min
- Drum Capacity - Optional Cable
- 195 ft
- Maximum Line Speed - Full Drum
- 20350 lb
- Control
- Hydraulic
- Maximum Line Speed - Bare Drum
- 32150 lb
- Rope Diameter - Optional
- 0.75 in
- Winch Drive
- Hydraulic
- Rope Diameter - Recommended
- 0.63 in
- Speed
- Variable
High Performance Winch
- Weight
- 1345 lb
- Drum diameter
- 10 in
- Winch drive
- Hydrostatic
- Winch length
- 27.76 in
- Maximum line pull – bare drum
- 40000 lb
- Maximum line speed – full drum
- 207 ft/min
- Drum width
- 10.8 in
- Drum capacity – optional
- 256 ft
- Rope diameter – recommended
- 0.63 in
- Maximum line pull – full drum
- 25000 lb
- Rope diameter – optional
- 0.75 in
- Speed
- Variable
- Maximum line speed – bare drum
- 131 ft/min
- Throat clearance
- 6.75 in
- Drum capacity – recommended cable
- 371 ft
- Overall width
- 29.2 in
- Control
- Hydraulic
Standard Equipment
-
- Power Train
-
- Air cleaner with precleaner, automatic dust ejection and underhood intake
- Aluminum bar plate cooling system (radiator, power train)
- Automatic traction control
- Cat® C3.6 diesel engine
- Drive, auxiliary
- Dual path, closed loop, hydrostatic transmission
- Electric fuel pump
- Fuel/water separator
- Turbocharged aftercooled
-
- Electrical
-
- Alarm, backup
- Alternator, 150 amp, heavy duty
- Batteries, heavy duty, maintenance free, 1,000 CCA
- Diagnostic connector
- Four integrated front halogen lights, two rear halogen
- Horn, electric
- Starter, electric, 12 V, heavy duty
-
- Undercarriage
-
- Heavy Duty Undercarriage
- Carrier rollers
- Guards, front/rear guiding
- Six roller track frame
- Track adjusters, hydraulic
- Track rollers, lifetime lubricated
-
- Hydraulic
-
- Hydraulic pump and oil
- Single lever, three function control
- Three valve hydraulics
-
- Cat Technology
-
- Third party 3D grade system compatible
- Slope Indicate
- Stable Blade - Basic Lift
-
- Attachments
-
- Rigid drawbar
- Front pull device
-
- Operator Environment
-
- Armrests, adjustable
- Coat hook
- Controls, seat mounted, fore/aft adjustment
- Cup holders
- Eco Mode
- Electronic Monitoring system with gauge:
– Chassis slope indication
– Diesel exhaust fluid (DEF)
– Engine coolant temperature
– Fuel level
– Hydraulic oil temperature - Electronic security system
- Engine air cleaner service indicator
- Engine RPM and gear display
- Floor mat, rubber, heavy duty
- Foot pads, dash
- Hour meter, electronic
- Independent forward/reverse speed settings
- Mirror, rearview, inside
- Power port, 12 volt
- ROPS/FOPS canopy
- Seat, air suspended, cloth or vinyl
- Seatbelt, hi-vis retractable 76 mm (3")
- Seatbelt buckling indicator/reminder
- Single pedal combining decel and brake functions
- Speed recall
- Storage compartment
- Throttle switch, rotary
- Travel speed limiter, electronic
Attachments
-
- Power Train
-
- Air cleaner with external precleaner
- Installation, winch
-
- Electrical
-
- Four integrated front LED lights, two rear LED
-
- Undercarriage
-
- Abrasion undercarriage (38 section)
- Track Pairs:
– Track, 406 mm (16 in)
– Track, 635 mm (25 in)
– Track, 762 mm (30 in)
-
- Hydraulic
-
- Four valve for use with ripper
- Four valve for use with winch
-
- Cat Technology
-
- Assist with Attachment Ready Option (ARO) includes:
– Slope Indicate
– Blade Load Monitor
– Stable Blade Lift and Tilt
– Slope Assist
– Traction Control
– Steer Assist
– AutoCarry - Grade 3D with Assist includes:
– Same Assist with ARO features
– Steer Assist 3D
– Grade 3D - Cat Product Link™ PLE643/PLE743 Cellular
- Cat Product Link PLE683/PLE783 Cellular/Satellite
- Full-color 254 mm (10 in) touchscreen grade display
- Cat Command Console (availability varies by region)
- Cat Command Station (availability varies by region)
- Assist with Attachment Ready Option (ARO) includes:
-
- Attachments
-
- Drawbar, towing
- Machine security system
- Mounting, winch
- Ripper, parallelogram, includes three
- shanks and teeth
- Winch, hydraulic, high performance
- Winch, hydraulic, retrieval
-
- Operator Environment
-
- Power Pitch
- Cab, with air conditioning
- Cab, polycarbonate windows and air conditioning
- Radio, AM/FM Bluetooth®
- Seat, air suspension, choice of:
– Vinyl, heated seat with heated controls
– Cloth, heated seat with heated controls
– Cloth, heated and ventilated seat with heated controls - Sound suppression
-
- Other
-
- Heater, engine, coolant 120 V/240 V
- Starting aid, ether