980 XE

Engine

Net Power @ 1,700 rpm – ISO 9249:2007, SAE J1349:2011

393 hp

Engine Model

Cat C13

Note (2)

The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and aftertreatment.

Note (1)

Cat engine meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 214 emission standards.

Gross Torque @ 1,200 rpm – SAE J1995:2014

1627 lb/ft

Engine Torque @ 1,200 rpm – ISO 14396:2002

1612 lb/ft

Net Torque @ 1,100 rpm – ISO 9249:2007, SAE J1349:2011

1539 lb/ft

Engine Power @ 1,700 rpm – ISO 14396:2002

420 hp

Gross Power @ 1,700 rpm – SAE J1995:2014

425 hp

Note (3)

Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels up to: • 20% biodiesel FAME (fatty acid methyl ester)* • 100% renewable diesel, HVO (h

Weights

Operating Weight

66877 lb

Note

Weight based on a machine configuration with Bridgestone 29.5R25 VSNT L4 radial tires, full fluids, operator, standard counterweight, ride control cold start, roading fenders, Product Link, open differential axles (front/rear), secondary steering, sound s

Bucket Capacities

Bucket Range

4.0-14.5 m³ 5.25-19 yd³

Transmission

Forward - 1

4.4 mile/h

Forward - 2

8.4 mile/h

Forward - 3

14.9 mile/h

Forward - 4

24.5 mile/h

Note

Maximum travel speed in standard vehicle with empty bucket and standard L4 tires with 935 mm (37 in) roll radius.

Reverse - 1

5 mile/h

Reverse - 2

9.6 mile/h

Reverse - 3

18.3 mile/h

Sound

Note (1)

For machines in European Union countries and in countries that adopt the EU Directives.

Note (2)

European Union Directive 2000/14/EC as amended by 2005/88/EC.

With Cooling Fan Speed at 70% of Maximum Value - Exterior Sound Power Level*

110

With Cooling Fan Speed at 70% of Maximum Value - Operator Sound Pressure Level (ISO 6396:2008)

70 dB(A)

With Cooling Fan Speed at Maximum Speed - Exterior Sound Power Level (ISO 6395:2008)

107 dB(A)

With Cooling Fan Speed at Maximum Speed - Exterior Sound Pressure Level (SAE J88:2013)

75

With Cooling Fan Speed at Maximum Speed - Operator Sound Pressure Level (ISO 6396:2008)

70 dB(A)

Air Conditioning System

Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg (4.2 lb) of refrigerant which has a CO2 equivalent 2.717 metric tonnes (2.995 tons).

Operating Specifications

Breakout Force

51008 lbf

Note (1)

For a machine configuration as defined under Weight.

Note (2)

Full compliance to ISO 14397-1:2007 Sections 1 thru 6, which requires 2% verification between calculations and testing.

Static Tipping Load - Full 40° Turn - No Tire Deflection

20965 kg

Static Tipping Load - Full 40° Turn - With Tire Deflection

43432 lb

Service Refill Capacities

Cooling System

13.7 gal (US)

Crankcase

9.8 gal (US)

DEF Tank

5.5 gal (US)

Differential - Final Drives - Front

24.3 gal (US)

Differential - Final Drives - Rear

24.3 gal (US)

Fuel Tank

112.5 gal (US)

Hydraulic Tank

40.4 gal (US)

Transmission

20.3 gal (US)

Hydraulic System

Implement System - Maximum Operating Pressure

4975 psi

Hydraulic Cycle Time - Total

10.1 seconds

Dimensions

Note

All dimensions are approximate and based on machine equipped with 5.4 m3 (7.1 yd3) general purpose bucket with BOCE and Bridgestone 29.5R25 VSNT L4 radial tires.

Dimensions - High Lift

Centerline of Rear Axle to Edge of Counterweight

8.9 ft

Centerline of Rear Axle to Hitch

6.3 ft

Ground Clearance

1.5 ft

Height - Top of Exhaust Pipe

12.5 ft

Height - Top of Hood

10.1 ft

Height - Top of ROPS

12.7 ft

Hinge Pin Height at Carry

2.2 ft

Hinge Pin Height at Maximum Lift

15.7 ft

Lift Arm Clearance at Maximum Lift

13.6 ft

Overall Length - Without Bucket

27.5 ft

Tread Width

8 ft

Wheel Base

12.6 ft

Width over Tires (Loaded)

10.9 ft

Dimensions - Standard Lift

Centerline of Rear Axle to Edge of Counterweight

8.7 ft

Centerline of Rear Axle to Hitch

6.3 ft

Ground Clearance

456 mm

Height - Top of Exhaust Pipe

3764 mm

Height - Top of Hood

3064 mm

Height - Top of ROPS

3829 mm

Hinge Pin Height at Carry

2 ft

Hinge Pin Height at Maximum Lift

4554 mm

Lift Arm Clearance at Maximum Lift

3881 mm

Overall Length - Without Bucket

8155 mm

Tread Width

8 ft

Wheel Base

3800 mm

Width over Tires (Loaded)

10.9 ft

Sustainability

Recyclability

98%