Product Specs
Engine
- Engine Model
- Cat® C27
- Engine Power - EU Stage V Engine - ISO 14396:2002
- 795 hp
- Bore
- 5.4 in
- Stroke
- 6 in
- Displacement
- 1650 in²
- Note (1)
- Meets EU Stage V emission standards and U.S. EPA Tier 4 Final.
- Note (2)
- Power ratings apply at a rated speed of 1,800 rpm when tested under the reference conditions for the specified standard.
- Note (3)
- All rating conditions are based on ISO/TR14396, inlet air standard conditions with a total barometric pressure of 100 kPa (29.5 in Hg), with a vapor pressure of 1 kPa (0.295 in Hg), and 25° C (77° F). Performance measured using fuel to EPA specifications
Operating Specifications
- Nominal Payload Capacity
- 138891 lb
- Gross Machine Operating Mass
- 262218 lb
- Body Capacities
- 26.9-38.3 m³ (35.2-50.1 yd³)
Weights
- Empty
- 115577 lb
- Empty - Front Axle
- 81716 lb
- Empty - Rear Axle
- 33861 lb
- Loaded
- 254468 lb
- Loaded - Front Axle
- 126669 lb
- Loaded - Rear Axle
- 127800 lb
Weight Distribution
- Empty - Front Axle
- 70.7%
- Empty - Rear Axle
- 29.3%
- Loaded - Front Axle
- 49.8%
- Loaded - Rear Axle
- 50.2%
Transmission
- Forward - 1
- 4.1 mile/h
- Forward - 2
- 5.7 mile/h
- Forward - 3
- 7.7 mile/h
- Forward - 4
- 10.3 mile/h
- Forward - 5
- 14 mile/h
- Forward - 6
- 18.9 mile/h
- Forward - 7
- 25.5 mile/h
- Reverse - 1
- 5.3 mile/h
- Note
- Maximum travel speeds with standard 35 × 65 R33 tires.
Final Drives
- Differential Ratio
- 3.46:1
- Final Drive Ratio
- 5.5:1
- Total Reduction Ratio
- 19.04:1
Body Hoist
- Raise
- 13 s
- Lower
- 24 s
- Total Cycle Time
- 37 s
Body Capacities
- Dump Body - 1 - Standard
- 35.2 yd³
- Dump Body - 2
- 42.6 yd³
- Dump Body - 3
- 44.2 yd³
- Dump Body - 4
- 47.9 yd³
- Dump Body - 5 (Light Material)
- 50.1 yd³
- Note
- Heaped SAE 2:1.
Turning Dimensions
- Outside Clearance Radius
- 393.9 in
- Inside Turn Radius
- 218.1 in
- Frame Oscillation
- 10°
- Articulation Angle
- 42.5 °
Service Refill Capacities
- Engine Crankcase - With Filter
- 25 gal (US)
- Transmission
- 14 gal (US)
- Hydraulic Tank
- 100.6 gal (US)
- Cooling System
- 39.6 gal (US)
- Front Differential and Final Drives
- 36.5 gal (US)
- Rear Differential and Final Drives
- 36.5 gal (US)
- Fuel Tank
- 237.7 gal (US)
Tires
- Tire Size
- 35 × 65 R33
Standards
- Standards
- ROPS/FOPS Certified Cab
Standard Equipment
-
- Powertrain
-
- Brake retarder control, automatic
- Brakes:
– All wheel disc
– Oil cooled
– Parking brakes, four wheels - Control throttle shifting
- Engine:
– Cat C27 12 cylinder diesel engine
– EU Stage V
– Air-to-air aftercooler (ATAAC)
– Fuel priming aid - Transmission, automatic planetary power shift (7F/1R)
– Gear blockout with tray up, programmable
– Ground speed limiting, programmable
– Torque converter with automatic lockup - Four wheel drive
- Remote transmission cooler
-
- Electrical
-
- Alarm, reversing
- Alternator, 225 amp
- Disconnect switch, 2 post, ground level
– Electric starting, 24V - Lights, LED:
– Headlights with dimmer switch
– Light, brake and tail
– Lights, reversing, automatic when reverse gear selected - Work light, rear, cab mounted
– Receptacle GP, auxiliary start
– Shutdown switch, ground level
– Product Link Elite
– Machine health information
-
- Operator Environment
-
- Cab, enclosed:
– ROPS/FOPS certified
– Tilt (cab is able to tilt 43° for maintenance access)
– HVAC, dual system - Caterpillar Electronic Monitoring System (CEMS), (dash instrument panels)
- Operator Presence System
- Automatic Brake Application (ABA)
- Brake Gauges, Front and Rear
- Idle timer (programmable)
- Light, residual brake pressure
- Low hydraulic oil level alarm
- Low park brake pressure indicator
- Mirrors, rear view
- Radio ready
- Seat, trainer/passenger with seat belt
- Steering wheel, tilt/telescopic
- Turn signal indicators
- Windshield wiper and washer
- TLV2 Cat Comfort Air Seat
- Cab, enclosed:
-
- Tires, Rims, And Wheels
-
- Tires must be selected from the mandatory attachments section
- Rims (set of 4):
– Five piece
– Tubeless
-
- Other Standard Equipment
-
- Adapters, oil sample
- Indicator light, tray up
- Axle suspension, front
- Belly guards
- Bumpers, front, rubber
- Cap, radiator, manual release
- Catalytic exhaust purifier/muffler
- Covers, exhaust
- Handholds
- Handrails, fold down
- Dump body
- Firewall
- Hitch, articulated and oscillated
- Hydraulic Burst Protection
- Lifting lugs, frame
- Secondary steering
- Tow pin, front and rear
- Tire Arrangement:
– Tire, 35/65 R33 VSNT Bridgestone - Ventilated covers
Attachments
-
- Optional Equipment
-
- Battery Shutdown
– Ground Level Isolation, In Cab Isolation Switch
– Ground Level Isolation, Engine Shutdown Switch
– Ground Level Isolation, In Cab Isolation, Engine Shutdown Switch - Body Dump
– Body, (32.6 m³/42.6 yd³)
– Body, (33.8 m³/44.2 yd³)
– Body, (36.6 m³/47.9 yd³)
– Body, (38.3 m³/50.1 yd³) - Body Liners, Impact and/or Wear
– 10 mm, Body, Dump (26.9 m³/35.2 yd³)
– 10 mm, Body, Dump (32.6 m³/42.6 yd³)
– 10 mm, Body, Dump (33.8 m³/44.2 yd³)
– 10 mm, Body, Dump (36.6 m³/47.9 yd³)
– 10 mm, Body, Dump (38.3 m³/50.1 yd³) - Body Wear Plate, External
– 8 mm, Body, Dump (26.9 m³/35.2 yd³)
– 8 mm, Body, Dump (32.6 m³/42.6 yd³)
– 8 mm, Body, Dump (33.8 m³/44.2 yd³)
– 8 mm, Body, Dump (36.6 m³/47.9 yd³) - Body Wear Protection Option: wear strip to cover edge of the pusher plate or full length of the ejector body tub side walls must be selected if the ejector body was chosen
- Brake Pressure Gauges
- Camera, Color Rear Facing
- Cover, Anti Vandalism for Shipping
- Aftertreatment Options
– DPF (Flow Through)
– DPF (Wall Flow) - Fast Fill System
– Coolant
– Engine Oil
– Fuel (Dual Tanks)
– Hydraulic Oil
– Transmission Oil - Ansul Fire Suppression, Wet 76L (AS5062)
- Fluids
– Arctic Fuel
– Arctic Coolant - Lighting
– Headlights with Dimmer Switch, LED
– Rear Work Light (Cab Mounted), LED
– Reversing Lights, LED - Lubrication System
– Automatic, Dump - Operator Station
– Sun Visor - Park Brake Switch Engagement
– Push to Apply
– Pull to Apply - Payload
– Truck Payload Measurement System (TPMS), Dump Body Only - Reflective Tape
- Rims
– Rim Identification Numbering
– Spare, Tubeless - Seat Cover
– Cat Comfort TLV2
– Seat Cover, Companion - Service Tools
– Body Pin Removal Tool
– Collet Jacking Bolts, Dump or Ejector
– Hoist Cylinder Supports (for Body Removal) - Window Dual Panel
- NOTE: Not all features are available in all regions.
- See your Cat dealer for more information
- Battery Shutdown