Exterior View
Product Specs
Engine
- Engine Model
- Cat® C11
- Engine Power - Tier 3 Engine - ISO 14396:2002
- 316 HP
- Bore
- 5.1 in
- Stroke
- 5.5 in
- Displacement
- 680 in²
- Note (1)
- Power ratings apply at a rated speed of 2,100 rpm when tested under the reference conditions for the specified standard.
- Note (2)
- Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F).
- Note (3)
- Engine derate will commence at an altitude of 3353 m (11,000 ft).
Operating Specifications
- Nominal Payload Capacity
- 48501 lb
- Gross Machine Mass
- 97488 lb
- Body Capacities
- 9-12 m³ (11.8-15.7 yd³)
Weights
- Empty
- 47042 lb
- Empty - Front Axle
- 35752 lb
- Empty - Rear Axle
- 11290 lb
- Loaded
- 97488 lb
- Loaded - Front Axle
- 46747 lb
- Loaded - Rear Axle
- 50742 lb
Weight Distribution
- Empty - Front Axle
- 76.00%
- Empty - Rear Axle
- 24.00%
- Loaded - Front Axle
- 48.00%
- Loaded - Rear Axle
- 52.00%
Transmission
- Forward - 1
- 3.5 mile/h
- Forward - 2
- 6.7 mile/h
- Forward - 3
- 9.9 mile/h
- Forward - 4
- 15.7 mile/h
- Reverse - 1
- 3.5 mile/h
- Note
- Maximum travel speeds with standard 18.00 × R25 tires.
Final Drives
- Differential Ratio
- 5.429
- Final Drive Ratio
- 4.765
- Total Reduction Ratio
- 25.87
Body Hoist
- Raise
- 13 s
- Lower
- 14 s
- Total Cycle Time
- 27 s
Body Capacities
- Body 1 - Standard Body
- 11.8 yd³
- Body 2
- 13.1 yd³
- Body 3
- 14.4 yd³
- Body 4
- 15.7 yd³
- Ejector Body
- 12.7 yd³
- Note
- Heaped SAE 2:1.
Turning Dimensions
- Outside Clearance Radius
- 294 in
- Inner Clearance Radius
- 161.2 in
- Frame Oscillation
- ±10°
- Articulation Angle
- 45 °
Service Refill Capacities
- Engine Crankcase - With Filter
- 7.1 gal (US)
- Transmission
- 5.3 gal (US)
- Hydraulic Tank
- 38.3 gal (US)
- Cooling System
- 15 gal (US)
- Front Differential and Final Drives
- 11.6 gal (US)
- Rear Differential and Final Drives
- 11.6 gal (US)
- Fuel Tank
- 95 gal (US)
- Transfer Gear Box
- 1.24 gal (US)
Tires
- Tire Size
- 18.00 × R25
Standards
- Standards
- ROPS/FOPS certified cab
Standard Equipment
-
- Electrical
-
- 12V power supply in cab
- Alternator:
– 95 amp open cabin
– 150 amp enclosed cabin - Auxiliary start receptacle
- Battery disconnect switch, ground level:
– Front left hand side - Circuit breakers:
– Main: 80 amp
– A/C: 80 amp (enclosed cab)
– Alternators: 105 amp (open); 150 amp for (enclosed) - Corrosive protection spray
- Diagnostic connectors
- Electric starting, 24V
- Engine start lockout switch, ground level (LH):
– Front left hand side - Engine shutdown switch, ground level (RH):
– Front right hand side - Lighting, LED:
– Brake and tail light
– Headlights with dimmer switch
– Rear work light (cab mounted)
– Reversing lights - Low maintenance batteries
- Reversing alarm
- Starting and charging system
- Directional indicator lamps
-
- Power Train
-
- Cat C11 ACERT ATAAC diesel engine, six-cylinder
- Auto shift transmission four speed forward/one speed reverse
- Manual fuel priming pump
- Exhaust, turbo compartment shielding
- Four wheel drive
- Long life coolant
- Body up speed limiter, 3-5 km/h (2-3 mph)
- Ejector body tailgate down speed limiter, 3-5 km/h (2-3 mph)
- Radiator cap manual release
- Radiator, single pane cross flow
- Rims, five-piece, tubeless
- Reverse modulated fully hydraulic enclosed wet, multiple-disc brakes, oil cooled
- Torque converter with automatic lockup
-
- Other Standard Equipment
-
- Oscillating hitch
- Body, dump, 9.0 m³ (11.8 yd³)
- Catalytic exhaust purifier/muffler group
- Decals, international pictographics
- Engine and transmission belly guards
- Fenders, standard with LH front mud flaps
- Firewall
- Fuel system manual shut off tap
- Frame lifting lugs
- Front and rear tow pin
- Hand hold (access on/off top deck)
- Operation and Maintenance Manual:
– English and other applicable local language to select - S·O·S℠ port:
– Coolant
– Engine oil
– Hydraulic oil
– Transmission oil - Tire arrangement:
– Tire, Michelin 18.00 × R25 XKD1A - Hydraulic and braking system manual pressure release function
- Steering frame lock
- Dump body retaining pins
- Ejector body retaining pin
-
- Operator Environment
-
- Dome light
- Door light
- Electric horns
- Open operator station ROPS/FOPS structure
- Operator present system
- Rearview mirrors
- Suspension seat, Tee, mechanical with retractable seat belt
- Tilt steering wheel
- USB charging port
- Electronic Monitoring System:
– Indicator lights
– Parking brake
– Electrical charging system
– Engine oil pressure alarm
– Engine coolant temperature alarm
– Engine coolant level alarm
– Transmission oil temperature alarm
– Torque converter oil temperature alarm
– Hydraulic oil temperature alarm
– Transmission oil filter alarm
– Brake cooling oil filter alarm
– Brake system alarm
– E stop
– Brake drag
– Transmission amber warning light
– Engine amber warning light
– IBA alarm
– Secondary steering active
– Operator present alarm
– Hydraulic oil level alarm
– Engine red fault light
– Transmission red fault light
– Steering oil pressure alarm
– Retarder (on)
– Body up
– Hoist not on float
– Cab door open
– Turn indicators
– High beam
– Alert warning light - Gauges (on screen display):
– Engine coolant temperature
– Transmission oil temperature
– Fuel level
– Engine oil pressure
– Steering oil pressure
– Brake accumulator oil pressure
– Service brake oil pressure
– Parking brake oil pressure
– Tachometer
– Speedometer
– Gear indicator
Attachments
-
- Optional And Mandatory Attachments
-
- Body dump:
– Body, 10.0 m³ (13.1 yd³)
– Body, 11.0 m³ (14.4 yd³)
– Body, 12.0 m³ (15.7 yd³) - Body ejector:
– Body, 9.7 m³ (12.7 yd³) - Camera, color rear facing
- Engine shutdown switch, cab
- Fluids:
– Arctic fuel
– Arctic coolant - Guard, mesh, open cab
- Guard, mesh, enclosed cab
- Park brake switch engagement:
– Push to apply - Rims:
– Rim identification numbering
– Spare, tubeless - Seat cover:
– Tee - Secondary steering system (electric driven)
- Service tools:
– Hoist cylinder supports (for body removal) - Enclosed operator station (includes as standard):
– Air conditioning (salt resistant)
– Cab pressurizer and filter
– Heater (electric)
– Window, sliding, cab door
– Windshield wiper and washer - Reflective tape
- Body dump: