Product Specs
Engine
- Net Power
- 1739 HP
- Engine Model
- Cat® 3516E
- Bore
- 6.7 in
- Stroke
- 8.5 in
- Displacement
- 4766 in³
- Rated Speed
- 1,600 rpm
- Gross Power - ISO 14396
- 1847 HP
- Net Power - SAE J1349 - Standard Ambient
- 1739 HP
- Net Power - SAE J1349 - High Ambient
- 1696 HP
- Peak Torque - 1,200 rpm - SAE J1995
- 8549 lb/ft
- Emissions
- U.S. EPA Tier 4 Final/EU Stage IV* or U.S. EPA Tier 1/EU Stage I Equivalent
- Gross Power - SAE J1995
- 1870 HP
- Torque Rise
- 39%
- Note (1)
- The power ratings apply when tested under the reference conditions for the specified standard.
- Note (2)
- The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and muffler.
- Note (3)
- The gross power advertised is with the fan at maximum speed.
- Note (4)
- *Tier 4 Final/EU Stage IV configuration is ready to meet Stage V emission requirements once in effect.
Operating Specifications
- Operating Weight
- 534852 lb
- Bucket Capacity Range
- 17.2 - 43.6 m³ (22.3 - 57 yd³)
- Rated Payload - Standard Lift (Moderate to High Digging Resistance)
- 45 ton (US)
- Rated Payload - Standard Lift (Low to Moderate Digging Resistance)
- 60 ton (US)
- Rated Payload - High Lift (Moderate to High Digging Resistance)
- 42 ton (US)
- Rated Payload - High Lift (Low to Moderate Digging Resistance)
- 55 ton (US)
- Bucket Capacity Range - Iron Ore
- 17.2 - 21.4 m³ (22.3 - 28 yd³)
- Bucket Capacity Range - Rock
- 19.1 - 29.1 m³ (25 - 38 yd³)
- Bucket Capacity Range - Coal
- 32.1 - 43.6 m³ (42 - 57 yd³)
- Note
- *In Low to Moderate Digging Resistance: please contact your local dealer to determine if your application is suitable for this increased rated payload
Buckets
- Bucket Capacities
- 19.1-43.6 m3 (25-57 yd3)
Transmission
- Transmission Type
- Cat Planetary Power Shift
- Forward - 1
- 4.6 mile/h
- Forward - 2
- 8 mile/h
- Forward - 3
- 13.6 mile/h
- Reverse - 1
- 5 mile/h
- Reverse - 2
- 8.8 mile/h
- Reverse - 3
- 14.9 mile/h
- Direct Drive - Forward 1
- Lock-up disables
- Direct Drive - Forward 3
- 15.2 mile/h
- Direct Drive - Reverse 1
- Lock-up disables
- Direct Drive - Reverse 3
- 16.8 mile/h
- Direct Drive - Forward 2
- 8.7 mile/h
- Direct Drive - Reverse 2
- 9.6 mile/h
- Note
- Travel speeds based on 58/85-57 tires.
Axles
- Front
- Fixed
- Rear
- Trunnion
- Oscillation Angle
- 9°
Hydraulic Cycle Times
- Raise
- 12.6 s
- Dump
- 3.1 s
- Rack Back
- 4.9 s
- Lower Float Down
- 4.2 s
- Total Hydraulic Cycle Time - Empty Bucket
- 23.5 s
Complete System Fill
- Oil Renewal System (ORS)*
- 20 gal (US)
- Fuel Tank - Standard
- 910 gal (US)
- Fuel Tank - With 24 hr Attachment
- 1500 gal (US)
- Cooling System
- 138 gal (US)
- Engine Crankcase
- 76 gal (US)
- Transmission
- 110 gal (US)
- Differential - Final Drives - Front
- 220 gal (US)
- Differential - Final Drives - Rear
- 200 gal (US)
- Hydraulic Tank - Implement and Hydraulic Fan
- 270 gal (US)
- Hydraulic Tank - Steering and Braking
- 100 gal (US)
- Diesel Exhaust Fluid (DEF) (Tier 4 Final/Stage IV)
- 137 gal (US)
- Note
- *Not available on Tier 4 Final machines. Not available in all regions.
Hydraulic System - Steering
- Maximum Flow at 1,700 rpm Engine Speed
- 259 gal/min
- Relief Valve Setting - Steering
- 4496 psi
- Steering Cycle Times - Low Idle
- 7.6 s
- Steering Cycle Times - High Idle
- 4.3 s
- Steering System - Circuit
- Pilot, Load Sensing
- Steering System - Pump
- Piston, Variable Displacement
- Total Steering Angle
- 80 degrees
Cooling System
- Ambient Capability Hydraulically Driven Demand Fan - Standard
- 40.8 °F
- Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final)
- 127.4 °F
- Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent)
- 131 °F
Hydraulic System - Lift/Tilt
- Lift/Tilt System - Circuit
- Positive Flow Control
- Lift/Tilt System - Pump
- Variable Displacement Piston
- Maximum Flow at 1,700 rpm Engine Speed
- 541 gal/min
- Relief Valve Setting - Lift/Tilt
- 4587 psi
- Cylinders, Double Acting - Lift, Bore and Stroke
- 370 × 1713 mm (14.6 × 67.4 in)
- Cylinders, Double Acting - Tilt, Bore and Stroke
- 310 × 1086 mm (12.2 × 42.8 in)
- Pilot System
- Open Loop and Pressure Reducing
Sound Performance - Standard
- Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent
- 72 dB(A)
- Operator Sound Level (ISO 6396:2008) - Tier 4 Final/EU Stage IV*
- 72 dB(A)
- Machine Sound Level (ISO 6395:2008)
- 119 dB(A)
- Sound Performance
- The measurement was conducted at 70 percent of the maximum engine cooling fan speed. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in
- Note
- *EU Stage V ready.
Dimensions - Standard Lift - Approximate
- Ground to Top of ROPS
- 23.4 ft
- Ground to Top of Exhaust Stacks
- 23.2 ft
- Ground to Top of Hood
- 18.6 ft
- Ground to Bumper Clearance
- 4.4 ft
- Rear Axle - Centerline to Bumper
- 20.4 ft
- Front Axle Centerline to Bucket Tip
- 21.3 ft
- Wheel Base
- 22.3 ft
- Maximum Overall Length
- 64 ft
- Ground to Lower Hitch Clearance
- 2.9 ft
- Ground to Center of Axles
- 6 ft
- Clearance at Maximum Lift
- 20.2 ft
- Rack Back Angle - Ground Level
- 39.7 degrees
- Rack Back Angle - Carry
- 47.7 degrees
- B-Pin Height - Maximum Lift
- 28.8 ft
- Maximum Overall Height - Bucket Raised
- 38.6 ft
- Rack Angle at Maximum Lift
- 59.5 degrees
- Dump Angle at Maximum Lift
- –50.0 degrees
- Reach - Maximum Lift
- 9.3 ft
- Tread Width
- 14.1 ft
- Width - Over Tires - With Bulge
- 18.8 ft
- Note
- Assumes 22.9 m3 (30 yd3) bucket for standard lift, and 21.4 m3 (28 yd3) bucket for high lift, fitted with Cat Advansys™ heavy duty tips. Assumes tire size 58/85-57.
Dimensions - High Lift - Approximate
- Ground to Top of ROPS
- 23.4 ft
- Ground to Top of Exhaust Stacks
- 23.2 ft
- Ground to Top of Hood
- 18.6 ft
- Ground to Bumper Clearance
- 4.4 ft
- Rear Axle - Centerline to Bumper
- 20.4 ft
- Front Axle Centerline to Bucket Tip
- 23.3 ft
- Wheel Base
- 22.3 ft
- Maximum Overall Length
- 66 ft
- Ground to Lower Hitch Clearance
- 2.9 ft
- Ground to Center of Axles
- 6 ft
- Clearance at Maximum Lift
- 23.3 ft
- Rack Back Angle - Ground Level
- 45.0 degrees
- Rack Back Angle - Carry
- 53.7 degrees
- B-Pin Height - Maximum Lift
- 31.7 ft
- Maximum Overall Height - Bucket Raised
- 41.2 ft
- Rack Angle at Maximum Lift
- 59.4 degrees
- Dump Angle at Maximum Lift
- –50.0 degrees
- Reach - Maximum Lift
- 8.8 ft
- Tread Width
- 14.1 ft
- Width - Over Tires - With Bulge
- 18.8 ft
- Note
- Assumes 22.9 m3 (30 yd3) bucket for standard lift, and 21.4 m3 (28 yd3) bucket for high lift, fitted with Cat Advansys™ heavy duty tips. Assumes tire size 58/85-57.
Sound Performance - Suppression
- Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent
- 71 dB(A)
- Operator Sound Level (ISO 6396:2008) - Tier 4 Final/EU Stage IV*
- 71 dB(A)
- Machine Sound Level (ISO 6395:2008)
- 117 dB(A)
- Sound Performance
- The measurement was conducted at 70 percent of the maximum engine cooling fan speed. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in
- Note
- *EU Stage V ready.
Brakes
- Brakes
- ISO 3450:2011
Standard Equipment
-
- Note
-
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
- Power Train
-
- Engine, 3516E High Displacement (HD) Mechanical Electronic Unit Injector (MEUI™-A), Air-to-Air Aftercooling (ATAAC) diesel, turbocharged/aftercooled
- Engine prelube
- Fuel priming pump (electric)
- Ground-level engine shutoff
- Engine air intake (above hood) precleaner
- Aluminum Modular Radiator (AMR)
- Automatic, ether starting aid
- Electronic throttle lock
- Impeller Clutch Torque Converter (ICTC) with Lock-Up Clutch and rimpull control system
- Rimpull control system
- Planetary powershift, 3F/3R electronic control transmission
- Delayed engine shutdown
- Oil-cooled, multi-disc, service brakes
- Electro-hydraulic parking brake
-
- Linkage
-
- Standard lift (40.8 tonnes/45 tons face, 54.4 tonnes/60 tons loose)
-
- Electrical
-
- Alternator
- Dry batteries
- 10/15 amp, 24V to 12V converter
- Disconnect switch to bumper
- LED warning lights (pattern selectable)
- LED lighting system (working lights, access and service platform lights, turn signals/hazard lights)
- Emergency jump-start receptacle
- Starter and transmission lockout in bumper
- 24V starting and charging system
- Electric starters
- 24V starting and charging system
- Electric starters
-
- Operator Environment
-
- Bonded glass, tinted
- Premium seat with heated and actively cooled leather, adjustable lumbar support, air adjustable bolsters on the seat and backrest, seat cushion tilt adjustment, and adjustable length seat cushion
- Dual lever lift and tilt function controls
- Implement kickouts
- Air conditioner
- Cab pressure indicator
- Graphical touchscreen information display conveys real-time operating information and payload measurement
- Heater, defroster, auto temperature controls
- Gauge instrumentation
– DEF Level, if equipped
– Coolant temperature
– Hydraulic oil temperature
– Fuel level
– Power train oil temperature
– Engine speed (tachometer)
– Transmission gear
– Ground speed
– Engine hour meter - Warning/indicator instrumentation
– Low DEF Level, if equipped
– Three category action alert system
– Brake malfunction
– Bucket float status
– Delayed engine shutdown status
– Engine idle shutdown status
– Engine malfunction
– Fuel economy mode enable status
– Hydraulic lockout
– Lockup clutch enable status
– Low fuel level
– Parking brake status
– Quick shift enable status
– Rimpull control enable status
– Seat belt warning
– Secondary steering
– Throttle lock status
– Transmission gear
– Turn signal - Keypad control with indicator lights
– Fuel economy mode
– Implement kickouts
– Lockup clutch
– Manual lube
– Quickshift enable
– Rimpull control system
– Side rearview mirror heater
– Throttle lock
– Turn signals
– Dash backlight control
– Hazard lights - Dome light in cab
- Lunchbox and beverage holders
- Steering and Transmission Integrated Control (STIC™) system
- Sun screen, pull down (front and rear)
- Vital Information Management System (VIMS™) with Information Display: external data port, Cycle Timer, integrated Cat Production Measurement (CPM)
- Keypad, messenger, ET, VIMS
- Coat hook
-
- Safety
-
- Electric (field and shop) horns
- Ground-access ladders
- Rear-vision camera
- Front frame access with steps
- Front walkway around cab
- Pump bay access ladders with T-handle and platform
- Tie-offs on ROPS and radiator guards
- Steering frame lock
- Stairways on both sides of the machine
- LED stairway and access lights
- Toe kicks
- Retractable seatbelt, 76 mm (3 in) wide
- Trainer seat with lap belt, 76 mm (3 in) wide
- Back-up alarm
- Secondary steering
-
- Machine Control And Guidance
-
- CPM Payload Weighing System
-
- Fuel Tank
-
- 12 hour (3440 L/910 gal)
-
- Cooling
-
- Standard ambient package (recommended for site conditions that do not exceed 43° C [110° F])
-
- Service
-
- Ground-level service center including:
– Service center light
– Implement and cooling fan oil level indicator
– Steering and brake oil level indicator
– Window washer solvent level indicator
– Transmission oil level indicator
– DEF level indicator (if equipped)
– Fuel level indicator
– Engine oil level indicator
– Engine coolant level indicator
– Automatic lubrication system grease tank level indicator
– DEF purge indicator lamp
– Starter lockout and LED
– Heavy-duty battery disconnect switch
– Stairway light switch
– Service lighting switch (if equipped)
– Fuel shutoff engine shutdown switch
– Engine oil fast-fill port
– Transmission oil fast-fill port
– Steering and brake hydraulic oil fast-fill port
– Steering and brake hydraulic oil drain port
– Oil renewal system fast-fill port
– Engine coolant fast-fill port
– DEF fill port (HRC only)
– Implement and cooling fan hydraulic oil fast-fill port
– Implement and cooling hydraulic oil drain port
– Automatic lubrication system grease tank fill port
– 24V jump-start receptacle
– 240V jacket water and engine oil heater plug (if equipped)
– 12V power port
– VIMS key switch
– 14-pin machine data port
– VIMS Messenger display - In-tank mounted cartridge-type case drain filters with in-line magnetic plugs on implement, cooling fan, brake and steering pumps
- High-pressure screens on the output side of implement, cooling fan, brake and steering pumps
- Pump efficiency monitoring
- Automatic lubrication system greases the linkage, hitch, steering and axle trunnion bearings
- Electronic pressure control of the automatic lubrication system eliminates pressure adjustment and monitors grease thickness for temperature compatibility
- Rock guards on linkage grease lines
- Cat O-ring face seal couplings
- Lockable service access doors
- Ecology drains for engine, radiator, hydraulic tank, steering and brake tank, brake cooling tank and axles
- High-speed engine oil change system
- Ground-level fast-fill fuel system
- Transmission guard
- Drawbar hitch with pin
- Cat XT™ hoses
- Left-side service center
- Oil sampling valves
- Ground-level service center including:
-
- Efficiency
-
- Economy Mode
- Variable displacement implement pumps
- Variable displacement load sensing steering
- Variable displacement cooling fan pump
- Torque converter lock-up clutch
Attachments
-
- Note
-
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
- Spare Rims
-
- 1118 mm (44") 152 mm (44 _ 57) (6") flange
- 1194 mm (47") 152 mm (44 _ 57) (6") flange
- 1194 mm (47") 127 mm (47 _ 57) (5") flange
-
- Sound
-
- Sound-suppression package
-
- Rims And Tires
-
- Rims – 1118 mm (44") (44 _ 57) 152 mm (6") flange. For use with 53.5/85-5776PR L5 tires
- Tires – 53.5/85-57 FS 76PR L5 (require 44" rims)
- Rims – 1194 mm (47") (47 _ 57) 127 mm (5") flange. For use with 60/80 R57L5R XMine D2 SR tires
- Tires – 58/85-57 84PR L4 (require 47" rims)
- Rims – 1194 mm (47") (47 _ 57) 152 mm (6") flange. For use with 58/85-5784PR L4 tires
-
- Electrical
-
- Service lights
-
- Power Train
-
- Oil Renewal System (ORS) (Not available on Tier 4 Final machines. Not available in all regions.)
-
- Linkage
-
- High lift (38.1 tonnes/42 tons face, 49.9 tonnes/55 tons loose)
-
- Operator Environment
-
- Rubber-mounted, high-impact resistant solar control glass (Complies with AS/NZS 2080)
- Joystick lift and tilt function controls
- AM/FM/AUX radio
- AM/FM/AUX/USB/BT/CD/SAT radio
-
- Safety
-
- Powered ground-access stairs
- Cat Detect (Rear Object Detection)
- Wheel chocks
-
- Cold Weather
-
- Cold-weather cooling fan bypass (recommended for temperatures below –29° C [–20° F])
- Heavy-duty starter (provides an additional electric starter motor and two additional batteries for a total of three starter motors and six batteries) (recommended for temperatures below 0� C [32� F])
- 240V engine oil and coolant heating elements (recommended in conditions from –18° C to –30° C [0° F to –22° F])
- Fuel heater (heated by recirculation using engine heat and a heat exchanger) (recommended in conditions from –18° C to –30° C [0° F to –22° F])
- Heated mirrors (recommended for below-freezing temperatures)
-
- Machine Control And Guidance
-
- Cat Terrain ready
-
- Fuel Tank
-
- 24 hour (5700 L/1,506 gal)
-
- Cooling
-
- High ambient package (recommended for site conditions that do not exceed 53° C [127° F])