Product Specs
Engine
- Net Power
- 699 HP
- Engine Model
- Cat® C27 ™
- Bore
- 5.4 in
- Stroke
- 6 in
- Displacement
- 1649.5 in³
- Torque Rise
- 18 %
- Rated Speed
- 1,800/min
- Emissions
- U.S. EPA Tier 4 Final or Tier 2 equivalent
- Net Power - SAE J1349
- 699 HP
- Gross - ISO 14396
- 752 HP
- Peak Torque - 1,200 rpm
- 2624 lb/ft
- Rated Speed - Gross - ISO 14396
- 752 HP
- Rated Speed - Gross - SAE J1995
- 766 HP
- Rated Speed - Net Power - SAE J1349 - High Ambient
- 648 HP
- Rated Speed - Net Power - SAE J1349 - Standard Ambient
- 699 HP
Operating Specifications
- Operating Weight
- 202398 lb
- Tipping Load - Articulated 35°
- 81896 lb
- Tipping Load - Straight
- 92990 lb
Transmission
- Transmission Type
- Cat-Planetenlastschaltgetriebe
- Forward - 1
- 4.5 mile/h
- Forward - 2
- 8.3 mile/h
- Forward - 3
- 14.2 mile/h
- Reverse - 1
- 4.9 mile/h
- Reverse - 2
- 9.1 mile/h
- Reverse - 3
- 15.5 mile/h
- Direct Drive - Forward 2
- 8.5 mile/h
- Direct Drive - Reverse 1
- 5.4 mile/h
- Direct Drive - Reverse 2
- 9.6 mile/h
- Note
- Travel speeds based on Michelin 45/65R39 LD D2**L5 tires.
- Direct Drive - Forward 1
- Lock-up disabled
- Direct Drive - Forward 3
- 15.2 mile/h
- Direct Drive - Reverse 3
- 16.4 mile/h
Axles
- Front
- Fixed
- Rear
- Trunnion
- Oscillation Angle
- 8.5°
Hydraulic Cycle Times
- Raise
- 9.4 s
- Dump
- 2.9 s
- Lower Float Down
- 3.6 s
- Rack Back
- 4.8 s
- Lower
- 3.7 s
Service Refill Capacities
- Fuel Tank
- 294.3 gal (US)
- Cooling System
- 54.9 gal (US)
- Transmission
- 29.1 gal (US)
- Differential - Final Drives - Front
- 71.6 gal (US)
- Differential - Final Drives - Rear
- 68.9 gal (US)
- Engine Crankcase
- 20 gal (US)
- Hydraulic System Factory Fill
- 210 gal (US)
- Hydraulic Tank - Implement and Hydraulic Fan
- 68.9 gal (US)
- Hydraulic Tank - Steering and Braking
- 34.9 gal (US)
Hydraulic System - Lift/Tilt
- Cylinders, Double Acting - Tilt, Bore and Stroke
- 317.5 mm × 819 mm (12.5 in × 32.2 in)
- Lift/Tilt System - Circuit
- Positive flow control
- Pilot System
- Open loop and pressure reducing
- Relief Valve Setting - Lift/Tilt
- 4786 psi
- Lift/Tilt System
- Variable displacement piston
- Maximum Flow at 1,800 rpm (1)
- 216 gal/min
- Maximum Flow at 1,800 rpm (2)
- 22.2 gal/min
- Relief Valve Setting - Main
- 507 psi
- Cylinders, Double Acting - Lift, Bore and Stroke
- 254 mm × 1264 mm (10.0 in × 49.8 in)
Hydraulic System - Steering
- Steering System - Circuit
- Pilot, load sensing
- Steering System - Pump
- Piston, variable displacement
- Total Steering Angle
- 70°
- Relief Valve Setting - Steering
- 4641 psi
- Maximum Flow at 1,400 rpm
- 94.5 gal/min
Sound Performance - Standard
- Machine Sound Level (ISO 6395:2008)
- 115 dB(A)
- Operator Sound Level (ISO 6396:2008)
- 69 dB(A)
Sound Performance - Suppression
- Machine Sound Level (ISO 6395:2008)
- 113 dB(A)
- Operator Sound Level (ISO 6396:2008)
- 69 dB(A)
Forks
- Fork End Area
- 78 ft²
Dimensions - Millyard Linkage - Approximate
- Ground to Top of ROPS
- 17.2 ft
- Ground to Top of Exhaust Stacks
- 16.6 ft
- Ground to Top of Hood
- 12.7 ft
- Ground to Bumper Clearance
- 3.1 ft
- Rear Axle - Centerline to Bumper
- 12.5 ft
- Front Axle Centerline to Fork Tip
- 17.6 ft
- Wheel Base
- 15.1 ft
- Maximum Overall Length
- 45.4 ft
- Ground to Lower Hitch Clearance
- 2 ft
- Ground to Center of Front Axle
- 3.9 ft
- Fork Height with Level Arms
- 8.9 ft
- Fork Top Clamp Opening
- 12.3 ft
- Fork Height at Maximum Lift
- 18.3 ft
- Hinge Pin Height at Maximum Lift
- 19.4 ft
- Dump Angle at Maximum Lift
- 29.3 degrees
Brakes
- Brakes
- SAE J1473 OKT90, ISO 3450:1992
Standard Equipment
-
- Note
-
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
- Operator Environment
-
- Air conditioner and heater with automatic temperature control
- Cab, sound-suppressed pressurized, protective structure (ROPS/FOPS), radio ready for (entertainment) includes antenna, speakers and converter (12V, 10-15 amp)
- 12V power port for mobile phone or laptop connection
- Camera, rear vision
- Cigar lighter and ashtray
- Coat hook
- Electro-hydraulic tilt and lift controls (seat mounted)
- Flip-up armrest
- Heater and defroster
- Horn, electric
- Implement hydraulic lockout
- Instrumentation, gauges: – Engine coolant temperature – Fuel level – Ground speed – Gear – Hydraulic oil temperature – Speedometer/tachometer – Torque converter temperature
- Instrumentation, warning indicators: – Action alert system, three category – Automatic transmission model enable status – Brake malfunction – Bucket float status – Delayed engine shutdown status – Engine idle shutdown status – Engine malfunction – Fuel economy mode enable status – Hydraulic lockout – Lockup clutch enable status – Low fuel level – Parking brake status – Rimpull control enable status – Seatbelt warning – Secondary steering (if equipped) – Throttle lock status – Transmission gear
- Keypad, control with indicator lights: – Auto trans mode speed range – Auto/manual transmission mode – Fuel economy mode – Implement kickout – Lockup clutch – Reduced rimpull – Throttle lock
- Light, dome (cab)
- Lunchbox and beverage holders
- Mirrors, rearview (externally mounted)
- Seat, Cat comfort (cloth) air suspension
- Seat belt, retractable, 76 mm (3 in) wide
- STIC control system with steering lock
- Tinted glass
- Trainer seat with lap belt
- Vital Information Management System (VIMS) 3G with graphical information display: external data port, customizable operator profiles, cycle timer, and integral Payload Control System (PCS): – Wet-arm wipers/washers (front, rear and corner) intermittent front wiper
-
- Power Train
-
- Brakes, full hydraulic, enclosed, oil-disc
- Axle-shaft oil-disc service brake
- Electro hydraulic parking brake
- Case drain filters
- Cat clean emission module (Tier 4 Final only)
- Demand fan
- Engine Cat C27
- Fuel priming pump (electric)
- Ground level engine shutoff, bumper
- Mufflers (under hood) (Tier 2 only)
- Precleaner, engine air intake
- Radiator, Aluminum Modular (AMR)
- Separated cooling system
- Starting aid, (ether) manual override
- Throttle Lock
- Torque Converter, Impeller Clutch with lock-up clutch feature and rimpull control system
- Transmission, 534 mm (21 in) planetary power shift (electronic) (3F/3R)
-
- Electrical
-
- Alarm, back-up
- Alternator, 150 amp
- Batteries, maintenance free (2 – 1,400 CCA)
- Converter, 10/15 amp, 24V to 12V
- Deutsch component connectors
- Electrical system, 24V
- Electronic transmission control
- Lighting system, halogen (front and rear) lighting, access stairway, engine compartment
- Starter, electric
- Starter lockout in bumper
- Starting receptacle for emergency start
- Transmission lockout in bumper
-
- Other
-
- Automatic tilt/lift kickouts electronically adjustable from cab
- Axle temperature sensor
- Battery disconnect and jump start receptacle, bumper
- Coupling, Caterpillar O-ring face seals
- Economy mode with on demand throttle
- Emergency platform egress
- Engine, crankcase, 500 hour interval with CH4
- Engine idle management features: – Auto idle kickdown – Delayed engine shutdown – Engine idle shutdown
- Fenders, steel (front)
- Guards, crankcase and power train
- Grouped/labeled lube points
- Hitch, drawbar with pin
- Hoses, Cat XT™
- Oil sampling valves
- Positive flow control hydraulic system
- Product Link
- Sight Gauges: hydraulic tanks, steering/fan and implement/brake, and transmission
- Stairway, left and right rear access
- Steering, load sensing
- Toe kicks
- Vandalism protection caplocks
- Venturi stack
- Premixed 50% concentration of extended life coolant with freeze protection to –34° C (–29° F)
Attachments
-
- Note
-
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
- Power Train
-
- –50° C (–58° F) antifreeze
- Engine oil change system, high speed, Wiggins
- Engine block heater 120V or 240V
- High ambient cooling – software
-
- Operator Environment
-
- Cab precleaner
- AM/FM/CD/MP3 radio
- Satellite Sirius radio with Bluetooth
- LED warning strobe
- CB radio ready
- Window sun shade
-
- Miscellaneous Attachments
-
- Front and rear roading fenders
- Fast fill fuel system (Shaw-Aero)
- Axle oscillation stop
- Heavy duty cab mounts